Augvape Vtec 1.8 Box Mod Review

Time has arrived for additional serious vape products – take a break for a few days from the AIO packages that entertained the top webpages of our own portal. Another new product was declared in the Augvape camp out, plus they made a decision to up-date probably the most shocking boxing mods of their collection. Forefather, needless to say, you need to be familiar, however, there are not so several changes. It is on them which I will draw your interest, trying not to grind much.

Augvape VTEC I.8 MOD

Augvape VTEC I.8 MOD -

Dimensions: 87.5 x 45 x 29.2mm 
Weight: 168g Shell 
material: zinc alloy + plastic 
Power: 2 x 18650 
Output power: 5 – 200W 
Voltage range: 0.5 – 7.2V 
Operating mode:POWER, BYPASS, VV mode, V mode, Auto mode 
Supported resistance: 0.05 – 3.0Ω 
Protection: against low / high resistance, from overheating, from short circuit, from reverse polarity, from overcharge / overdischarge 
Connector type: steel 510, pin gold-plated , spring-loaded 
Screen / diagonal: yes, color 
Micro-USB port / charging: yes, charging current 1.2A 
Update / firmware: yes 
Color: see photo below 

Augvape VTEC I.8 MOD -

Options
– VTEC I.8 mod 
– USB cable 
– user manual 
– warranty card

Augvape VTEC I.8 MOD -

So, the appearance of the boxing mod has evolved little – most likely, you do not even immediately identify it from its predecessor. This continues to be a rectangular container, stylized as being a cylinder prevent include from the well-known Honda motor.

Augvape VTEC I.8 MOD -

The beginning variety of design and style should not be called wealthy – there are only three choices, even though the initial is among them.

Augvape VTEC I.8 MOD -

The initial variation that catches your eye is the connector landing mat. Now it’s just darkish rather than a lined edition.

Augvape VTEC I.8 MOD -

The 2nd notable variation was the put underneath the epidermis on the back of the unit.

Augvape VTEC I.8 MOD -

The front side portion is different tiny. Firstly, we see the inscription “VTEC” – indeed, now, or quite, lastly, that’s it. Next, the power realignment gear has evolved, etc. So far as I understand, now it really is protected against dampness infiltrating inside it. The fire switch, as prior to, is hidden, the show is small but quite educational.

Augvape VTEC I.8 MOD -

Access to the battery compartment can also be from the hinged deal within the bottom in the gadget. The designers report that they managed to make it a bit more trustworthy and improved their “wear resistance”, nevertheless it was not possible to visually evaluate these adjustments.

Augvape VTEC I.8 MOD -

There are also minimal alterations in features. Varivolt setting added – um … you say. But it would not better to include thermal management. Well, that’s the way the designers reasoned)

Augvape VTEC I.8 MOD -

The price is $59.99.

Augvape VTEC I.8 MOD -

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Augvape Vtec 1.8 Box Mod
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Smok RPM40 Vape Pod System Kit

Veiik Airo Vape Pod System Kit- Limited Edition

Voopoo Drag Nano Kit

Smok Novo 2 Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Rincoe Tix Vape Pod System Kit Review

And again, the brand new AIO set reaches the middle.This time the business endured Rincoe.They already walked up expertise in this section, sufficient time will come for pretty much significant items.In purchase never to invest some time on foreplay, I suggest to begin online dating immediately.

Rincoe Tix Vape Pod System Kit

Rincoe Tix POD kit - decorated box ...

Dimensions: 90.7 x 43 x 19mm 
Weight: unknown 
Case material: zinc alloy + plastic 
Power: built-in 1000mAh 
Cartridge capacity: 2ml 
Evaporator resistance: 0.8 / 1.0Ω 
Voltage range: 3.2 – 4.2V 
Operating mode: POWER 
Supported resistance: 0.3 – 3.0Ω 
Protection:from low / high resistance, from overheating, from short circuit, from overcharging / overdischarge 
Screen / diagonal: no 
Micro-USB port / charging: yes, Type-C, charging current 1A 
Color: see photo below 

Rincoe Tix POD kit - decorated box ...

Options
– Tix POD mod 
– replaceable cartridge (pre-installed) 
– replaceable evaporator 2pcs 0.8 / 1.0Ω (one pre-installed) 
– USB cable 
– lanyard 
– user manual 
– warranty card

Rincoe Tix POD kit - decorated box ...

this is not a hackneyed form component through the stereo.Therefore, it proven pretty nice.Dimensions are not to say that they are tiny, however you cannot name an essential novelty either.The bundle came rectangle-designed, even so the edges and ends in the interests of much better ergonomics are prudently curved.

Rincoe Tix POD kit - decorated box ...

With colours, complete stuffing – as much as seven style alternatives.Moreover, there is simply one “calm” of the.

Rincoe Tix POD kit - decorated box ...

Replaceable printer ink cartridge of regular capacity, utilization of it opens after eliminating the area board.Also, anyway, it is actually possible to carry out refueling.

Rincoe Tix POD kit - decorated box ...

There are 2 kinds of replaceable evaporators, one of those particular is created spanning a grid.They are designed for diverse evaporation kinds, and, properly, for refreshments with different pure nicotine components.

Rincoe Tix POD kit - decorated box ...

So that you can provide this “selection”, the developers have performed the cabability to change the airflow.

Rincoe Tix POD kit - decorated box ...

The real key whole body hides inside itself a built-in battery of the normal capacity.She is destined to demand about an hour.Cause Type-C connector.

Rincoe Tix POD kit - decorated box ...

The fireplace switch is disguised as being a decorative place as a guard, and is found in a handy spot.But the complete control panel is found on the front end.Here you will observe the small important for transforming the manufacturing voltage – you can find three options general.By the manner in which, to notify the home owner in the picked environment, a impartial Directed indicator was cleaned directly down.The second indication – the bottom a single – is mainly responsible for the battery stage.

Rincoe Tix POD kit - decorated box ...

Furthermore, one of many corners shows a mount for any entire lanyard for putting on in the neck.

Rincoe Tix POD kit - decorated box ...

The price of $ 40.9.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Rincoe Tix Vape Pod System Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Innokin Adept Starter Kit

Eleaf Rotor Sub ohm Tank

Voopoo Drag Nano Kit

Smok Novo 2 Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Dovpo Blotto RTA Review

In this article, we propose to consider a new serviced tank from Dovpo called Blotto RTA .

Today’s vaping market is quite crowded with simple Pod-format devices, and every Chinese company considers it their duty to roll out something of their own, and even better than one. And therefore, releases of full-fledged serviced atomizers are so rare, and every time the release of something like that causes vapers genuine joy. So, the other day, the famous manufacturer of devices Dovpo just brought such positive news, presenting its new offspring, developed in conjunction with the eminent YouTube player Vaping Bogan. The device is called Blotto RTA  and now we will get acquainted with its design.

Blotto RTA  will arrive on the shelves of vape shops in three body colors: ganmetal, steel and black. The dimensions of the tank are average, but the diameter is somewhat knocked out of the usual indicators – 25.5 mm. The design of the device separately deserves attention, and the creator himself puts a lot of emphasis on it. The atomizer is equipped with 810 drip type with a yellow edging on the top of the Ultem, and in the case of the steel version the color will be neutral.

In addition to the drip types mentioned above, a “bubble bulb” will also be made of polished Ultem material, expanding the volume of the tank from 2ml to 6ml. In addition, for users who do not like this material, in the box with the device you can find another such flask, but from ordinary transparent glass.

The top cover of the gas station, which has decorative and at the same time very functional cutouts, received a bayonet connection instead of the classic threaded one, which will definitely affect the speed of access to the atomizer gas station. But the platform with the holes is flat, probably, when closing the lid, the last few drops will protrude from under the last.

As the main feature of Blotto RTA, the  manufacturer positions the local blowing system at 242 °, made in the form of many small holes on the outside and a semicircle inside. The deck is implemented in a non-rigorous manner and is able to accommodate both one and two spirals. Grooves under the ends of the wool are protected by an external ring with a thread onto which the dome of the evaporation chamber is screwed.

Features  Dovpo Blotto RTA :

  • Diameter: 25.5mm
  • Capacity: 2ml / 6ml
  • Bubble flasks: glass, ultem
  • Airflow: 242 °
  • One or two spirals
  • 810 drip types
  • Refill at bayonet connection
  • Colors: gunmetal, steel, black

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Dovpo Blotto RTA
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Eleaf Rotor Sub ohm Tank

Innokin Jem Vape Pen AIO Kit

Smok Novo 2 Pod System Kit

Veiik Airo Vape Pod System Kit- Limited Edition

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Nevoks Lusty Pod System Kit Review

Nevoks has released the Lusty Pod Starter Kit. The miniature device provided an integrated 1000 mAh battery, a maximum power of 25 watts and a capacious cartridge that supports many different evaporators.

On July 25, Nevoks presented the Lusty Pod Kit on their Facebook page all-in-one  . The compact device was made of a combination of light alloy and plastic, in four unobtrusive colors. The compact body was given an oval silhouette with a slightly convex profile without sharp edges and corners. The front and back panels are trimmed with soft plastic inserts. They supplied a large ignition button with an indicator and sent it to the facade. A USB port was installed on one of the narrow ends.

Output power is automatically optimized for winding resistance and can be from 12 to 25 watts. The cartridge does not require a complete replacement, instead, it uses replaceable evaporators, available in five variations. Among them are provided instances for both free and for cigarette blowing with resistance from 0.6 to 1.4 ohms. To switch puffs, you must install the cartridge on the other side. Power provides a decent built-in battery capacity of 1000 mAh. The tank has an increased volume of 3.3 ml, the filling hole is located on the side wall.

Main characteristics:

  • Size – 97 by 33.7 by 19.7 mm
  • Built-in 1000 mAh battery
  • Charging current 1A
  • Power from 12 to 25 watts
  • Tank capacity – 3.3 / 2 ml

Features:

Portable size with fashionable appearance

Powered by 1000mAh internal battery with a 12-25W output

Applies advanced chipset with automatic recognition

The 3.3ml refillable pod with side filling design

Innovative coils fit for both MTL and DL vaping

Utilizing adjustable airflow for excellent flavor

Package Included:

1 × Lusty Device

1 × 0.6ohm mesh coil for sub-ohm vaping

1 × 1.4ohm regular coil for MTL vaping

1 × Rubber Plug

1 × USB Cable

1 × User Manual

1 × Warranty Card

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Nevoks Lusty Pod System Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Innokin Jem Vape Pen AIO Kit

Innokin Adept Starter Kit

Veiik Airo Vape Pod System Kit- Limited Edition

Eleaf Rotor Sub ohm Tank

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Dovpo Peaks Vape Pod System Kit Review

The next day begins with a new AIO set. This time Dovpo distinguished itself. Basically, they rivet the device more seriously, however, and mainframe products do not disdain. By the way, there are not so many similar examples in their assortment range, therefore with pleasure I suggest to get acquainted with the recruit. 

Dovpo Peaks POD 

Dovpo Peaks POD - again the lighter ...

Dimensions: 89.8 x 39 x 18.4mm 
Weight: unknown 
Case material: zinc alloy + plastic 
Power: built-in 650 mAh 
Cartridge capacity: 2 ml 
Evaporator resistance: 0.8 / 1.4Ω 
Output power: 8 / 15W 
Operating mode: POWER 
Protection:Low / high resistance, overheating, short-circuit, overcharge / overdischarge 
Connector Type: Magnetic 
Shield / diagonal: No 
Micro-USB port / charging is: eat, USB Type C, the charging current is 0.65A 
Color: see photo below 

Dovpo Peaks POD - again the lighter ...

Options
– Peaks mod 
– replaceable cartridge (pre-installed) 
– 2 pcs removable evaporators 0.8 / 1.4Ω (one pre-installed) 
– Lanyard 
– USB cable 
– user manual 
– warranty card 

Dovpo Peaks POD - again the lighter ...

Well, form factor, we have a sign – it is something like the well-known lighters. The hinged lid and its opening mechanism are absolutely identical to the “natural” one.

Dovpo Peaks POD - again the lighter ...

The decor is peculiar – one can say to an amateur – the side panels are “dazzled” with prints. Dimensions do not say that large – rather average. 

Dovpo Peaks POD - again the lighter ...

A replaceable cartridge of standard capacity, it will be refilled from above, which means there is no need to remove it from the mod. Drip type is removable, but the dimension is its own – do not roll your lip about your copies. Replaceable evaporators are offered two types – one on the grid (for dt), the other on ceramics (for mt). That’s just blowing adjustment is nowhere to be seen. 

Dovpo Peaks POD - again the lighter ...

The mode itself hides within itself a not very capacious built-in battery, the full charge cycle will take about one hour. The causal connector developers defined at the bottom, moreover, it is also Type C. By the way, on the case you can see a tiny hole to control the level of filled fluid.

Dovpo Peaks POD - again the lighter ...

On the front side, there is a key for changing the output power – only two options are provided, plus there is a seven second prehit. Slightly below the LED indicator. Fire buttons no – activation by tightening. 

Dovpo Peaks POD - again the lighter ...

By the way, in the box you will find, among other things, a lanyard for wearing around your neck. 

Dovpo Peaks POD - again the lighter ...


Dovpo Peaks POD - again the lighter ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Dovpo Peaks Vape Pod System Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Vladdin Eden Vape Pod System Kit

Smok Novo 2 Pod System Kit

Voopoo Drag Nano Kit

Voopoo Drag 2 Platinum 177W TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Freemax Fireluke 2 Subohm Tank Review

Well, and finally I will tell you at once about two updates from the company Freemax. As you remember, their main specialization is non-service, therefore the newly-made tanks also did not become an exception. In addition, the developers offer two versions at once, since their TX is absolutely identical, we will get acquainted with all the crowd. 

Freemax Fireluke 2-Metal Edition 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

Freemax Fireluke 2-Graffiti Edition 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

Case material: stainless steel 
Atomizer type: maintenance-free 
Evaporators: 0.12 / 0.15 / 0.2 / 0.5Ω 
Capacity: 2 / 5ml 
Diameter: 24mm landing / 28mm buble glass 
Height: 47.8mm s Drip 
Connector Type : 510, Pin Gold Plated 
Weight:unknown 
Color: see photo below 

Package
contents – Freemax Fireluke 2-Metal Edition / Freemax Fireluke 2-Graffiti Edition 
– replaceable evaporators 2pcs 0.15 / 0.2Ω (one is preinstalled) 
– spare origings 
– spare glass 
– user manual 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

Our guests look pretty decent, they are not knocked out for conventional canons in this segment. Unless it is possible to ascertain – they are rather small in height. 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

As you have noticed, the only difference is in the design – in the metal version you can only see bare metal, while the version of graffiti was decorated with plastic with bright prints. 

So the first will be offered in the following options.

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

The colored version also does not lag behind in the number of colors offered. 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

Drip types 810th landing, from version to version differ – so in the plastic version they are made of plastic, whereas in the metal they are logically made of metal. The cover construction is identical – it is sliding, under it is a medium-sized filling hole. 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

The capacity is frankly small, but the complete bubble glass will make it 2.5 times larger. 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

With replaceable evaporators there is perfect abundance here. True, in the box you will find only two types. Well, in general, new items can digest just an incredible number of different evaporators from this manufacturer. You can say this is a kind of generalists – stick what you want.

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

The airflow is regulated by a rotating ring with a stopper. Air inlets of a decent size are understandable, because they should be serviced, both by low-resistance units and evaporators with a fairly high rate. 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

Pin is gilded and acts on both versions enough. 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

Adequate price tag, I have not yet met any of these copies. 

Freemax Fireluke 2-Metal Edition and Freemax Fireluke 2-Graffiti Edition - two brothers of different blood ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Freemax Fireluke 2 Subohm Tank
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Vladdin Eden Vape Pod System Kit

Smok Novo 2 Pod System Kit

Voopoo Drag Nano Kit

Voopoo Drag 2 Platinum 177W TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Teslacigs P226 Starter Kit Review

Just a couple of years ago, vapers could have been surprised by almost any novelty that was somehow different from the “little one”. Now the situation has changed significantly – vapers have become more demanding and sophisticated, since you can’t surprise anyone with either the DNA board, or the color touch display, or the built-in MP3 player. Therefore, manufacturers constantly have to invent something new, gaining the trust of vapers with quality and original design. It is on this principle that Teslacigs works – it is enough to recall its legendary Punk or WYE series. Not so long ago, the new starter kit from this Chinese manufacturer Teslacigs P226 kit was released, which uses a familiar to many vapers board (it has already established itself on the positive side) and a new military-style design. Knowing the fact

General information

Teslacigs P226 kit is a starter kit consisting of a compact box-mod for two batteries equipped with a powerful proprietary chipset and an atomizer of its own design, which is designed to work with replaceable evaporators. The company’s developers paid special attention to the design, so the P226’s box-mod is made in an army style – it looks more like a machine handle or an activator for a bomb. The device uses a chipset familiar to many vapers, which, despite its seeming simplicity, is distinguished by reliability and stable operation. This starter kit is equipped with a Tind Tank atomizer, which works on replaceable evaporators with a resistance of 0.18 Ohm, which ensures its taste and bulk. You can buy Teslacigs P226 kit in four colors – gun metal, steel, red and green.

Equipment

As in most starter kits of this class, the Teslacigs P226 kit is equipped quite standardly, but so that the vaper can use it right after the purchase. Therefore, in the traditionally simple corporate box you can find:

  • Box mod P226 Mod;
  • Tind Tank Atomizer with preloaded T-X3 Coil evaporator (0.18 ohms mesh coil) and 4.5 ml glass;
  • Spare evaporator T-X3 Coil (0.18ohms mesh coil);
  • Spare glass;
  • Set of origings;
  • USB cable;
  • Two user guides.

Box Mod P226 Mod

If you ask the vapers what device from Teslacigs is known to them, then half will answer with the Nano 120W Steampunk, and the second with the Invader. The new box-mod can be called a worthy successor of these series, because the P226 Mod is made in the best traditions of the company. Designers decided to make not just a banal “brick”, but a more interesting “army” option.

Naturally, you won’t surprise anyone with military themes in the mods, but the P226 Mod will be pleasantly pleasing to many – there are numerous projections and grooves on the case, thanks to which the device looks more like an automatic magazine or a remote control panel with an explosive device. The similarity is further added by the large “fire” button, which is pressed with a barely audible click. But in any case, we can confidently say that the ergonomics of the device is at the highest level, as it sits very nicely in the hand.

The battery has been fitted with a battery of 18650 watts. It is very convenient to connect the micro USB connector located on the side.

If we talk about the P226 Mod chipset, then this is the standard branded chip from Teslacigs, which is used in most devices of the company. The functionality is quite standard – varivat, temperature control, TCR, but it will be quite enough for most vapers. Separately, it is worth noting the stability of the board – it shows “honest” resistance and “honest” Watts. For ease of use, the device is equipped with a small monochrome display with a vertical orientation, where you can find the necessary information for the vaper on the operation of the box-mod.

Atomizer Tind Tank

The fact that Teslacigs developed the Tind Tank atomizer specifically for the P226 kit is good news – it’s immediately obvious that the company’s specialists work for vapers. It cannot be said that Tind Tank is something supernatural, it is a standard “non-servant”, but at the same time a sufficiently high-quality one.

Atomizer works on branded replaceable TS-X3 Coil evaporators on a 0.18 ohm grid. Alas, but so far only one version of evaporators is available and only with such resistance. But due to the use of the mesh vaper will get great taste and bulk. Working capacity for such evaporators is 70-80 watts, so it is worth considering this immediately after installing the evaporator in the atomizer.

The volume of the Tind Tank is 4.5 ml, which is quite enough for a comfortable soaring of most vapers. Airflow standard – adjustable bottom. To refuel, simply unscrew the top cover and pour the liquid into a sufficiently large opening.

Conclusions and impressions

Teslacigs P226 kit is quite an interesting starter kit that many vapers will definitely like. Naturally, there are certain questions about the atomizer, but the box-mod will please with its functionality and design.

Advantages and disadvantages

disadvantages

  • Only one type of evaporator;
  • The top surface of the mod will scratch when replacing the atomizer.

Virtues

  • Original design;
  • Excellent ergonomics;
  • Reliable fee;
  • Simple operation;
  • Fast charge;
  • Comfortable tank;
  • Excellent taste transfer and bulk.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Teslacigs P226 Starter Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Voopoo Drag 2 Platinum 177W TC Box Mod

Vladdin Eden Vape Pod System Kit

Voopoo Drag Nano Kit

Smok Novo 2 Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Jmate PCC Charger for Juul Review

I have repeatedly said that Juul became a phenomenon in vaping. Maybe this is not so noticeable with us, but at home in the USA this toy captured the market. This is not to say that the era of closed systems in the industry actually began with this device. Not surprisingly, such popularity has led to interest from other manufacturers. For example, Jmate are engaged in the production of accessories under the Juul and have already achieved some success. P

Vape Wholesale Supply,Vape Wholesale China – AVE40

IMHO, this thing looks like that can cause a feeling of envy even among those who do not like Juul. Agree, very worthy, as for a regular accessory. For those who perceive vaping, as part of their style will be interesting. But this little thing not only looks beautiful, but also has useful functionality. 

Jmate - when an accessory is steeper than your setup
Jmate - when an accessory is steeper than your setup

Dimensions : 

Height – 100 mm. 
Width – 56 mm. 
Thickness – 12 mm. 

Jmate - when an accessory is steeper than your setup

There are three compartments in the case – with a contact group for the battery and two for cartridges. The capacity of the built-in battery is 1200 mah, which should be enough for several recharges (5V / 500mAh). Charging of the bank itself takes place via micro usb (5V / 1A). Full charge cycle – 90 minutes. 

Jmate - when an accessory is steeper than your setup

Powerdrive car charger

In my opinion, the most successful (in terms of public interest) proposal of the manufacturer. As it is easy to guess, we have a car charger. The principle of work should be familiar to most readers. Roughly speaking, the power supply becomes a cigarette lighter, and at the other end there is a Juul compartment and a separate usb for other purposes. 

Jmate - when an accessory is steeper than your setup
Jmate - when an accessory is steeper than your setup

– 12V / 24V; 
– 5V 500 mAh; 
– 5V 1A (usb). 

Jmate - when an accessory is steeper than your setup

P2 PCC

Another poverbank, but made in a completely different format. And to be honest, it is even cooler than the first version! Owner go unnoticed with such a thing just will not work. In terms of performance characteristics there are some minor differences. First, the capacity dropped to 800 mah (5V / 1A). Secondly, it fits as many as three spare cartridges. Thirdly, a LED indicator appeared, the utility of which is difficult to overestimate. 

Jmate - when an accessory is steeper than your setup
Jmate - when an accessory is steeper than your setup

Dimensions : 

Height – 115 mm. 
Width – 31 mm. 
Thickness – 29 mm. 

Jmate - when an accessory is steeper than your setup

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Jmate PCC Charger for Juul
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Nord Pod System Kit

Voopoo Alpha Zip TC Kit

Voopoo Drag Nano Kit

OUMIER Armadillo RDA

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Eleaf iStick Mix Starter Kit Review

Eleaf has released the iStick Mix Kit. The “epoxy” kit was assembled from a 160-watt two-battery box-mod box and an unattended Ello Pop tank with a rubberized bulb.

On March 28, Eleaf presented an Eleaf iStick Mix Kit device on instagram . The boxmod was packed in a rectangular case with rounded corners and a convex silhouette. The ends trimmed polymer panels that combine different patterns and patterns, in the palette of colors included five variations. A familiar set was placed on a narrow front side – a round fire button, a monochrome display and two control keys. USB port installed on the side. Batteries hidden under one of the removable sidewalls.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

The branded Avatar Chip card supports varivatt, thermal control, bypass and several memory modes. Output power can reach 160 watts. Resistance ranges from 0.05 to 3.0 ohms. Two 18650 batteries are used for power supply. When charging via USB, you can use up to 2.5A current.

The body of the complete tank Ello Pop is made of stainless steel and is completed with an “epoxy” drip tip in the fashion color. The filling hole is under a massive firebox with protection from playful children’s hands. Glasses of plump flasks are surrounded by thin rubber rings. There is a rotating ring blowing with wide notches.

Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40

The package includes two evaporators from the HW series, a QC3.0 USB cable, extra glass, spare parts and instructions.

Main characteristics:

  • Set size – 134.5 by 52 by 27 mm
  • Set weight – 209.5 g
  • Meals – 2×18650
  • Charging current up to 2.5A
  • Maximum power – 160 watts
  • Tank capacity – 2 / 6.5 ml

Parameters:

Eleaf iStick Mod

Size: 52.0*27.0*134.5mm

Weight: 209.5g(without cell)

Battery type: Dual 18650

Output wattage: 160W max

Resistance range: 0.05Ω-3.0Ω

Colors: Seabed Snaker, Hell Witch, Glary Knight, 

Wind Ninja, Skyline Numen 

ELLO POP Atomizer

Diameter: 28mm(6.5ml)/26.5mm(2ml)

Height: 56.5mm

Weight: 64.7g

E-liquid capacity: 6.5ml / 2ml

Colors: Black, Silver

Parameters Of Eleaf iStick Mix Starter Kit 160W with ELLO POP Atomizer 6.5ml/2ml

Package Included:

1×iStick Mix(without cell) 

1×ELLO POP Atomizer(6.5ml&2ml)

1×HW-M2 0.2ohm Head

1×HW-N2 0.2ohm Head

1×QC3.0 USB Cable

2×User Manuals

Spare parts

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Eleaf iStick Mix Starter Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Smok Micare Vape Pod Starter Kit

Voopoo Alpha Zip TC Kit

Voopoo Drag Nano Kit

OUMIER Armadillo RDA

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Teslacigs Invader 4X Vape Kit Review

Recently, it is less and less common on the shelves of vape shops (including virtual ones) to meet the classic varivolts, which at one time were the most popular among vapers. They were replaced by simpler and more functional options, but this does not mean that the device format itself is forgotten, since from time to time well-known manufacturers release new items of this kind. One of the legendary devices in this class was the varivat from the well-known Chinese company Teslacigs – Invader, which is no longer produced by the Chinese in its original form. The company has already released several devices from this series and the last of them is the Teslacigs Invader 4X Vape Kit – still the same version, but already in a plastic case, light and slightly resembling its ancestor. It’s hard to say whether this starter kit is worthy of the proud name Invader,

General information

Teslacigs Invader 4X Vape Kit is a starter kit consisting of a two-battery option with the ability to change the operating voltage, and an easy-to-use double-helix drip that will allow you to get enough taste and pile. The Invader 4X box mod somewhat resembles its predecessors, but it is made of plastic, which makes it easier and more practical. Dripka, which is equipped with a starter kit, does not differ by innovative technologies, but at the same time it is easy to maintain and use and allows you to get quite a decent taste and bulk. Teslacigs offers this starter kit in four colors – black, blue, red and white.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

Equipment

We should pay tribute to the company Teslacigs, which is always trying to adequately complete their devices, and especially the start kits. Therefore, in a fairly simple and unobtrusive white box, the vaper waits for:

  • Varivatt Invader 4X mod;
  • Dip atomizer Invader 4X RDA;
  • Spare screws;
  • Spare Oringas;
  • Hexagon;
  • Two prewound spirals;
  • Cotton;
  • USB charging cable;
  • User’s manual;
  • Certificate of originality.

You can honestly say that there is a box so that you can assemble a device right after unpacking and begin to soar.

Varivatt Invader 4X mod

Immediately, you will have to upset those lovers of the good old Invader, made of aluminum alloy and resembling a tin box of an army type, that the Invader 4X mod resembles its name only. Why did Teslacigs decide to move away from a bit of a brutal and crude concept of options? This is a million question. But the fact remains that the Invader 4X mod is made of plastic. There is, of course, a significant plus in this – it weighs only 75.5 grams without batteries, which in its own way can not but rejoice, since it is no longer a problem to carry it in your pocket. In this case, it is worth paying tribute to the manufacturer regarding ergonomics – the device turned out to be compact and convenient to use. The fitting diameter of the device is 25 mm, so there will be no problems with the selection and installation of the rip instead of the complete one.

Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40

Invader 4X mod is a fairly traditional varivolt, which is controlled by a potentiometer located at the bottom of one of the side edges. In this version, the vaper itself can also control the voltage applied to the coil, within 3-8 Volts. The minimum resistance with which the mod is capable of working is 0.08 ohms, which is quite enough for many vapers. At the same time, the device is equipped with all the protections necessary for safe and stable operation.

The device is designed for a maximum power of 280 watts, provided by two 18650 batteries, although for such an indicator of power, clearly two batteries will not be enough. The installation of batteries is done by removing one of the side panels, held with fairly strong magnets. If necessary, batteries can be charged with a current of 2A using the micro-USB connector located on the side opposite to the battery compartment.

Dip atomizer Invader 4X RDA

Drip atomizer Invader 4X RDA in its construction very much resembles Mad Dog 2 from Desire, and it cannot be said that this is bad, since the drip can be safely attributed to a stable middle class.

The base in dripke is two-column with holes for the installation of two spirals. Fastening spirals made from the top, which is very convenient and practical. Blowing the bottom-side, allowing you to get quite decent taste transfer and bulk. The bath is deep enough, containing 1.2 ml of liquid, which is a normal indicator for a drip of this class.

Conclusions and impressions

Despite the fact that the Teslacigs Invader 4X Vape Kit is “not the same”, the starter kit will definitely interest many, because even with a plastic case it has all the same functionality. The Teslacigs Invader 4X Vape Kit is a simple and seemingly uncomplicated set, but it will allow the vaper, who prefers to use the varivolt instead of the varivatt, to get rather high performance indicators.

Advantages and disadvantages

disadvantages

  • A slight gap in the battery compartment;
  • Inflated power ratings;
  • Very simple complete dripka.

Virtues

  • Rich equipment;
  • Low weight;
  • Good ergonomics;
  • Voltage range 3-8 volts;
  • Ease of use and maintenance;
  • Possibility of charging;
  • Decent taste and transfer rates.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:  Teslacigs Invader 4X RDA Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Smok Priv N19 Vape Kit

Voopoo Drag Nano Kit

Vaporesso Sky Solo Plus Starter Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html