Nicely, the second novelty was the set has already been a little bit more significant. This time, the famous business Joyetech had taken benefit of it. They carry on and saturate their type of Surpass products, furthermore, not hesitating to fluctuate the “positive”.Well, I won’t torment you – probably you can’t wait around to fulfill you)))
Dimensions: 72.9 x 24.4 x 23.4mm Weight: 55g Case material: metal + plastic Power: built-in 1000mAh Output power: unknown Operating mode: POWER Protection: against low / high resistance, against overheating, against short circuit, against overcharge / overdischarge Connector type: standard 510th Screen / diagonal: no Micro-USB port / charging: yes, Type-C, charging current 2A Color: see photo below
EXCEED X Atomizer
Case material: stainless steel Atomizer type: maintenance-free Evaporators: 0.4 / 0.5 / 1.2Ω Capacity: 1.8ml Diameter: 19mm Height: 44.2mm with drip type Connector: 510, pin gilded Weight: 31g Color: see photo below
Options – EXCEED X mod – EXCEED X Atomizer – replaceable evaporators 2pcs 0.4 / 1.2Ω (one preinstalled) – USB Type-C cable – user manual – warranty card The
total atomizer is new, nevertheless, it is absolutely nothing specific. Topdressing – a cover using a kid locking mechanism – the capability is small, due to the fact its measurements are small. Standard airflow control – swivel diamond ring in the base.
The tank can digest three types of interchangeable coils from the EX collection, a couple of that will be within the package in the satisfied proprietor from the kit.
The primary body of the instance is “a lot more fashionable.”The profile is nearly cubic, the colors are “pretty”, the measurements usually are not that big. In general, it is actually quite typical, practically a pipe function.
The flame switch is fairly big, situated on the front side part. In addition to its simple functions, it may alter the output voltage. The developers have three modes. The Guided indicator will help you figure out which setting is presently chosen.
The built-in battery of regular capability. However, the key good stage is fast asking – only half an hour. The Type-C connector is found in the base of the mod. By just how exactly the same Directed indicator will tell you about the stays of this very same cost.
Well, I propose to finish with a more interesting instance. The next Aegis appears on the vape arena – how many have already been released – do not even count. Nevertheless, this series is quite popular among users, probably, for this reason, the Hikweipists decided to update their flagship.
Dimensions: 90 x 56.1 x 31.3mm Weight: unknown Case material: plastic + metal + silicone Power: 2 x 18650 Chipset: AS 2.0 chipset Output power: 5 – 200 W Operating mode: POWER, TC (NI200, SS, TI ), VPC, Bypass Temperature range: 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃ Supported resistance: 0.05 – 3.0Ω Protection: against low / high resistance, against overheating, against short circuit, against reverse polarity, against overcharge / overdischarge Connector type: steel 510, pin gold-plated, spring loaded Screen / diagonal: yes, color, 2.4 ” Micro-USB port / charging: yes, charging current 2A Color: see photo below
Options – Aegis X mod – spare plug for the charging connector – spare plugs – USB cable – user manual – warranty card Also, the new flagship will be delivered in a kit with a friend non-servants d.
The appearance of the new thing is recognizable – the new aegis has retained, or rather adopted, some of the elements characteristic of the series. So we see the buttons familiar with the profile, the decorative insert trimmed with a metal bar, however, now completely small. And the profile is saved – it is still not a small brick.
The flagship is protected on all fronts – IP67 – which means protection from water, dust and some shockproof.
At the time of the release, which, by the way, had not even taken place, the developers prepared a bunch of design options, but only the print of the inserts and the color of the metal bar differ.
The landing pad, as such, no atoms land on the top end of the mod. The stock on landing promises to be decent, but at the moment it was not possible to evaluate its exact capabilities.
Here, in the neighborhood, you can see the charging connector, traditionally covered with a silicone plug. The charging current is pretty fast.
The control panel is focused on the front end. Buttons became even larger, but retained the profile of the trigger gun. Surely using them will be comfortable.
But the display moved to the sidewall, and even increased in size just to “indecent.” It is colored, not to say that it provides a lot of information – no, just the design is large, easy to read and a little “intrusive”. The color scheme will be changeable.
Access to the battery compartment from the bottom, lid on the latch with a slider.
As I understand it, a brand new (or upgraded) chipset is working inside. The functionality on board is standard decent.
Just a couple of years ago, vapers could have been surprised by almost any novelty that was somehow different from the “little one”. Now the situation has changed significantly – vapers have become more demanding and sophisticated, since you can’t surprise anyone with either the DNA board, or the color touch display, or the built-in MP3 player. Therefore, manufacturers constantly have to invent something new, gaining the trust of vapers with quality and original design. It is on this principle that Teslacigs works – it is enough to recall its legendary Punk or WYE series. Not so long ago, the new starter kit from this Chinese manufacturer Teslacigs P226 kit was released, which uses a familiar to many vapers board (it has already established itself on the positive side) and a new military-style design. Knowing the fact
Teslacigs P226 kit is a starter kit consisting of a compact box-mod for two batteries equipped with a powerful proprietary chipset and an atomizer of its own design, which is designed to work with replaceable evaporators. The company’s developers paid special attention to the design, so the P226’s box-mod is made in an army style – it looks more like a machine handle or an activator for a bomb. The device uses a chipset familiar to many vapers, which, despite its seeming simplicity, is distinguished by reliability and stable operation. This starter kit is equipped with a Tind Tank atomizer, which works on replaceable evaporators with a resistance of 0.18 Ohm, which ensures its taste and bulk. You can buy Teslacigs P226 kit in four colors – gun metal, steel, red and green.
As in most starter kits of this class, the Teslacigs P226 kit is equipped quite standardly, but so that the vaper can use it right after the purchase. Therefore, in the traditionally simple corporate box you can find:
Box mod P226 Mod;
Tind Tank Atomizer with preloaded T-X3 Coil evaporator (0.18 ohms mesh coil) and 4.5 ml glass;
If you ask the vapers what device from Teslacigs is known to them, then half will answer with the Nano 120W Steampunk, and the second with the Invader. The new box-mod can be called a worthy successor of these series, because the P226 Mod is made in the best traditions of the company. Designers decided to make not just a banal “brick”, but a more interesting “army” option.
Naturally, you won’t surprise anyone with military themes in the mods, but the P226 Mod will be pleasantly pleasing to many – there are numerous projections and grooves on the case, thanks to which the device looks more like an automatic magazine or a remote control panel with an explosive device. The similarity is further added by the large “fire” button, which is pressed with a barely audible click. But in any case, we can confidently say that the ergonomics of the device is at the highest level, as it sits very nicely in the hand.
The battery has been fitted with a battery of 18650 watts. It is very convenient to connect the micro USB connector located on the side.
If we talk about the P226 Mod chipset, then this is the standard branded chip from Teslacigs, which is used in most devices of the company. The functionality is quite standard – varivat, temperature control, TCR, but it will be quite enough for most vapers. Separately, it is worth noting the stability of the board – it shows “honest” resistance and “honest” Watts. For ease of use, the device is equipped with a small monochrome display with a vertical orientation, where you can find the necessary information for the vaper on the operation of the box-mod.
The fact that Teslacigs developed the Tind Tank atomizer specifically for the P226 kit is good news – it’s immediately obvious that the company’s specialists work for vapers. It cannot be said that Tind Tank is something supernatural, it is a standard “non-servant”, but at the same time a sufficiently high-quality one.
Atomizer works on branded replaceable TS-X3 Coil evaporators on a 0.18 ohm grid. Alas, but so far only one version of evaporators is available and only with such resistance. But due to the use of the mesh vaper will get great taste and bulk. Working capacity for such evaporators is 70-80 watts, so it is worth considering this immediately after installing the evaporator in the atomizer.
The volume of the Tind Tank is 4.5 ml, which is quite enough for a comfortable soaring of most vapers. Airflow standard – adjustable bottom. To refuel, simply unscrew the top cover and pour the liquid into a sufficiently large opening.
Conclusions and impressions
Teslacigs P226 kit is quite an interesting starter kit that many vapers will definitely like. Naturally, there are certain questions about the atomizer, but the box-mod will please with its functionality and design.
Advantages and disadvantages
Only one type of evaporator;
The top surface of the mod will scratch when replacing the atomizer.
Eleaf has released the iStick Mix Kit. The “epoxy” kit was assembled from a 160-watt two-battery box-mod box and an unattended Ello Pop tank with a rubberized bulb.
On March 28, Eleaf presented an Eleaf iStick Mix Kit device on instagram . The boxmod was packed in a rectangular case with rounded corners and a convex silhouette. The ends trimmed polymer panels that combine different patterns and patterns, in the palette of colors included five variations. A familiar set was placed on a narrow front side – a round fire button, a monochrome display and two control keys. USB port installed on the side. Batteries hidden under one of the removable sidewalls.
The branded Avatar Chip card supports varivatt, thermal control, bypass and several memory modes. Output power can reach 160 watts. Resistance ranges from 0.05 to 3.0 ohms. Two 18650 batteries are used for power supply. When charging via USB, you can use up to 2.5A current.
The body of the complete tank Ello Pop is made of stainless steel and is completed with an “epoxy” drip tip in the fashion color. The filling hole is under a massive firebox with protection from playful children’s hands. Glasses of plump flasks are surrounded by thin rubber rings. There is a rotating ring blowing with wide notches.
Recently, it is less and less common on the shelves of vape shops (including virtual ones) to meet the classic varivolts, which at one time were the most popular among vapers. They were replaced by simpler and more functional options, but this does not mean that the device format itself is forgotten, since from time to time well-known manufacturers release new items of this kind. One of the legendary devices in this class was the varivat from the well-known Chinese company Teslacigs – Invader, which is no longer produced by the Chinese in its original form. The company has already released several devices from this series and the last of them is the Teslacigs Invader 4X Vape Kit – still the same version, but already in a plastic case, light and slightly resembling its ancestor. It’s hard to say whether this starter kit is worthy of the proud name Invader,
Teslacigs Invader 4X Vape Kit is a starter kit consisting of a two-battery option with the ability to change the operating voltage, and an easy-to-use double-helix drip that will allow you to get enough taste and pile. The Invader 4X box mod somewhat resembles its predecessors, but it is made of plastic, which makes it easier and more practical. Dripka, which is equipped with a starter kit, does not differ by innovative technologies, but at the same time it is easy to maintain and use and allows you to get quite a decent taste and bulk. Teslacigs offers this starter kit in four colors – black, blue, red and white.
We should pay tribute to the company Teslacigs, which is always trying to adequately complete their devices, and especially the start kits. Therefore, in a fairly simple and unobtrusive white box, the vaper waits for:
Varivatt Invader 4X mod;
Dip atomizer Invader 4X RDA;
Two prewound spirals;
USB charging cable;
Certificate of originality.
You can honestly say that there is a box so that you can assemble a device right after unpacking and begin to soar.
Varivatt Invader 4X mod
Immediately, you will have to upset those lovers of the good old Invader, made of aluminum alloy and resembling a tin box of an army type, that the Invader 4X mod resembles its name only. Why did Teslacigs decide to move away from a bit of a brutal and crude concept of options? This is a million question. But the fact remains that the Invader 4X mod is made of plastic. There is, of course, a significant plus in this – it weighs only 75.5 grams without batteries, which in its own way can not but rejoice, since it is no longer a problem to carry it in your pocket. In this case, it is worth paying tribute to the manufacturer regarding ergonomics – the device turned out to be compact and convenient to use. The fitting diameter of the device is 25 mm, so there will be no problems with the selection and installation of the rip instead of the complete one.
Invader 4X mod is a fairly traditional varivolt, which is controlled by a potentiometer located at the bottom of one of the side edges. In this version, the vaper itself can also control the voltage applied to the coil, within 3-8 Volts. The minimum resistance with which the mod is capable of working is 0.08 ohms, which is quite enough for many vapers. At the same time, the device is equipped with all the protections necessary for safe and stable operation.
The device is designed for a maximum power of 280 watts, provided by two 18650 batteries, although for such an indicator of power, clearly two batteries will not be enough. The installation of batteries is done by removing one of the side panels, held with fairly strong magnets. If necessary, batteries can be charged with a current of 2A using the micro-USB connector located on the side opposite to the battery compartment.
Dip atomizer Invader 4X RDA
Drip atomizer Invader 4X RDA in its construction very much resembles Mad Dog 2 from Desire, and it cannot be said that this is bad, since the drip can be safely attributed to a stable middle class.
The base in dripke is two-column with holes for the installation of two spirals. Fastening spirals made from the top, which is very convenient and practical. Blowing the bottom-side, allowing you to get quite decent taste transfer and bulk. The bath is deep enough, containing 1.2 ml of liquid, which is a normal indicator for a drip of this class.
Conclusions and impressions
Despite the fact that the Teslacigs Invader 4X Vape Kit is “not the same”, the starter kit will definitely interest many, because even with a plastic case it has all the same functionality. The Teslacigs Invader 4X Vape Kit is a simple and seemingly uncomplicated set, but it will allow the vaper, who prefers to use the varivolt instead of the varivatt, to get rather high performance indicators.