Already every day in a row, we start with a new product from VOOPOO. Yes, these guys are prepared for the last exhibition, perhaps more fiercely than all manufacturers. Again, the new device belongs to the AIO segment. Looking ahead, I will say that it doesn’t carry anything supernatural in itself – so is an ordinary device, but it’s not without an interesting moment.
Dimensions: 85.7 x 28.8 x 12.4mm Weight: 30g Case material: aluminum alloy + plastic Power: built-in 420mAh Cartridge capacity: 1.8ml Evaporator resistance: 1.6Ω Output power: 6 – 12W Voltage range: 3.2 – 4.2V Operation mode:POWER (thermo control mode) Protection: from low / high resistance, overheating, short circuit, overcharge / overdischarge Connector type: magnetic Screen / diagonal: no Micro-USB port / charging: yes, charging current 0.35A Color: see photo below
Options – Find S mod – replaceable cartridge (preinstalled) – USB cable – user manual – warranty card – chip certificate
The appearance of the device is pretty neat, the form factor is convenient, the dimensions are small – ergonomics and stealth should be expected decent. The decor again rules the contrast of colors – this time, the developers have divided the device with a vertical line. And what really is different.)
The manufacturer did not stint with the assortment of color design, and he presented six options right from the start – here you’re not a smoldering classic, and bright spots for the coming summer season.
Cartridge medium capacity, it will refuel the side. However, this does not mean that it will be possible to do this without extracting it directly from the mod. A silicone plug seals the causative hole. The resistance of the built-in evaporator is also average.
The main body is equipped with a built-in battery of a very small capacity. A full charge cycle takes just over one hour, the causal connector is placed on the bottom of the device.
There are no buttons for a fayer on the body of a mod, hence the conclusion – it is activated by tightening. But there is the smallest “baby” LED indicator, it will inform its owner about the remnants of the “vitality” of the battery.
All this farm is managed by a new, but already familiar to you, chipset. By the way, the device has implemented the functionality of “thermal monitoring”, therefore, the developers promise life without Garik.
I have not yet met an adequate price tag, because the novelty has not yet laid down on the shelves of online shopping sites.
The Freemax Twister kit is the latest release from Freemax. The Twister comes with a very respectable inbuilt 2300mAh battery and offers 80W variable wattage. Sitting atop the Twister is the new Fireluke 2 Tank.
The Freemax Twister is an excellent size, lightweight and portable and a great starter kit for beginners or a great carry round for established Vapers alike.
I received the Freemax Twister 80W Starter Kit in Red from AVE40.COM but the kit does come in various other designs and colours.
The Twister Kit was sent to me for the purposes of review. As always, I will give you my own, honest opinion of this product after a lengthy testing period.
What’s in the Box?
Freemax Twister 80W Mod
Freemax Fireluke 2 Tank
X2 Mesh Coil 0.2 ohm 40-80W pre-installed
X1 Mesh Coil 0.15 ohm 40-90W spare
5ml Bubble Pyrex Glass
Spare O Rings
Freemax Twister mods
Product Size: 7 x 101.6mm
Battery: 2300 mAh (Internal)
Output Wattage: 5 – 80 Watts
Output Voltage: 0.5 – 9 Volts
Output Current Range: 1.0A – 30A
Resistance Range: 0.1 – 3.0 ohm
Wattage Adjustment: Twist the base of the device
Freemax Fireluke 2 Tank
X2 Mesh Coil 0.2 ohm 40-80W pre-installed
Adjustable Bottom Airflow
Slide across top fill
Gold Plated 510 pin
Design and Build Quality
Freemax Twister 80W Mod
I absolutely love the design of the Freemax Twister. Admittedly, it might not be everyone’s cup of tea but the retro 90’s look, for me, is a refreshing style to hit the shelves at the beginning of 2019.
The build quality is excellent, the finish is superb. No rattles or loose parts to be seen or heard. The kit is really lightweight and portable and sits in the hand with ease with the size makes for easy carrying in your pocket or bag.
One thing I will mention, though this can’t be found out with a one or two week test, is the sturdiness of the “Twister” wattage changer sitting at the bottom of the device. After all, that is going to take the brunt of the knocks and is on the base where you sit the device down.
The device itself is finished very nicely, no sharp corners or awkward protruding edges and not a hint of a rattle anywhere.
The fire button on this device is ideally placed to be used with either the finger or the thumb.
You press the button to instantly fire the device and five quick presses powers on and off the device.
Freemax Fireluke 2 Tank
I haven’t, until recently, been a user of stock coil Tanks. I have always used rebuildable RTA’s as that’s where you would get all the flavour. That is, until I got a Freemax Mesh Pro Tank. Stock coils have certainly come a long way in the last year or so.
The Freemax Fireluke 2 Tank certainly doesn’t disappoint in flavour or the looks department as it matches seamlessly with the Freemax Twister battery.
Changing the Coil
To insert the coil into the tank, simply screw in the coil to the bottom part of the Tank, put the Glass over the bottom section then simply screw the top part of the tank down.
How To Fill The Fireluke 2 Tank
Filling the Fireluke 2 Tank couldn’t be simpler.
Push back the top cover at the red dot until the cap goes back no further.
You will be met by a sizeable slot to put your e-liquid in.
Close up the top cover.
Freemax Twister 80W
So, the Freemax Twister 80W is a tube Mod. A tube mod with an inbuilt 2300mAh battery and marketed as a starter kit.
Boy, I wish there were starter kits out there like this when I switched from cigarettes to vaping, life would have been so much easier. New vapers today have a huge selection of kits to start off with and the Freemax Twister would be right up there at the top of the pile for me.
The design is excellent with a huge retro look that could have been pulled right out of the 90’s. It’s slim and lightweight and has enough power from the internal battery to last a good 8 to 10 hours depending on how you vape.
Some people will say that they don’t like the design. Some people will probably come out and say this is aimed at “younger” vapers. Everyone is different and everyone will have an opinion, after all, that’s what makes the world such a brighter place.
I for one love it and I can tell you, I’m no youth coming up to 50 years old.
How does the Freemax Twister Kit Perform?
Well, upon receiving this kit I was really looking forward to using it. The kit had everything a new vaper needed. A simple mod with no screen, no temperature controlor other menu settings to have to rifle through and change.
An updated Fireluke 2 Tank. How could they beat the original Fireluke Mesh Tank that Michelle loved so much and one that got a 9.9 rating?
Well, let me tell you, the Fireluke 2 is a 10/10 every day and I believe they have addressed some of the downfalls of the original. No longer do you have to wait for the coil to prime.
Although I wouldn’t recommend you put your e-liquid in the tank and start vaping from the off, certainly after a minute it is ready to go.
The kit as a whole performs very well indeed.
Changing your wattage could not be easier. A simple twist in either direction and it’s changed. You can choose from 5-80W.
This kit is a new vapers dream. Saying that, this is also a superb kit for the discerning vaper out there.
Flavour and Vapour Production
I won’t beat about the bush with this section of the review. The flavour from this tank is a 10/10 for a stock coil tank. Testing this against some of my rebuildable RTA’s matches and in some cases, beats them. As for cloud, you aren’t going to win a cloud comp with it but you get a decent vapor production from the Fireluke 2 tank.
I used the pre-installed X2 Mesh Coil and it was still going strong after 3 weeks.
Great build quality
Top Notch Flavour
Ease of use
Quick firing Mod
Good Battery Life
Questionable longevity of the Wattage Twister (Subjective)
My Final Thoughts
I have really enjoyed my time testing out the Freemax Twister Kit. Although I wouldn’t solely put this kit down to starters. I’m sure even some hardened vapers out there will want to have this kit in their arsenal. There isn’t any reason you shouldn’t go out and buy this kit.
My only real concern would be the Wattage Twister/Selector at the bottom of the device although in the time I have tested the device I haven’t had a problem at all and it feels very sturdy. Only time will tell if this remains the fact after a few months usage.
It’s been a while since last one punk mod was released. Honestly speaking, Teslacig became famous and welcome since they had launched the first Punk mod which special steam punk style caught people’s eyes, of course it also gets a bit lot of appreciation of their fans. But how about this new punk mod exactly? Will it be the next fashionable punk? Let’s see it now.
Teslacigs Punk 86W Mod has exquisite carving appearance which shows classic vaping times, it can call back vapers’original vaping experience. The Punk Mech mod is powered by single 18650 battery and is capable of 86W output. It is equipped with 0.49″ OLED screen, you can read the data clearly. With the most outstanding classic punk style design, Tesla Punk 86w Mod will match with your style and make you fashionable at the same time.
Look at these baby
Cell Type: Single 18650 cell(discharge current should be above 40A)
Output Mode: P(Power) / B(By Pass) mode
Output Wattage: 7-86W(in 0.5W increments)
Max Output Voltage: 8.5V
Max Output Current: 30A
OLED Screen: 0.49″
Resistance Range: 0.1-3.0ohm
Color: Antique Brass, Antique Copper, SS, Gunmetal
The kit version includes the Aspire Feedlink squonk mod and the Revvo Boost tank.
The Feedlink mod is a semi-regulated device. There are no adjustments and it will only output the power of the battery – like a mechanical device. However there are some safety features which are not on a mechanical device:
10 second fire cut off
Battery reverse protection
Short circuit protection
Over discharge protection
Over heat protection
Battery level indicator light.
The mod requires a single 18650 battery which is not included and it outputs 3-4.2V depending on the charge state of the battery.
Inside the mod is the 7ml squonk bottle which when squeezed feeds the bottom feed Revvo Boost tank.
The Revvo Boost tank is basically the standard Aspire Revvo tank but with a bottom feed 510 pin.
The tank uses the new style flat radial coils and has a 2ml capacity chamber too.
There are 5 colour versions available – Silver, Black/Blue, Gunmetal/Chrome, Silver/Sunset Red and Black/Nightsky.
I have been excited to get this beauty fired up – especially the Revvo boost tank! I struggle with my hands so not always up to building RDA’s and there are not many with stock coil heads which are also bottom feed.
This is an absolutely stunning kit it really is. Together the match of the tank and mod is just beautiful. It has a real industrial rugged feel to it in the Gunmetal version I received whilst still being pleasing to the eye.
Sadly though the tank is a slightly wider diameter than the mod resulting in a slight but noticeable overhang – which is very very sad.
So to look at this it reminds you of the handle of a gun or some kind of hard-ass tool. The handle of a massive logger’s saw or something.
The side panels on mine are metal and in a darker colour than the mod body. They have a textured feel with “Aspire” branding set into them. Both sides of the mod look exactly the same so perfect for left or right hand use.
On the top of the mod is a sturdy 510 connector but the size of tank you can use on this is limited – as stated above the supplied Revvo Boost even overhangs a bit. So really 23mm diameter is about the maximum size without overhang. However the side panels of the mod do extend beyond that to take the whole width to 30mm but you can see the overhang.
Also on the top is the fire button. This is a textured pivoted button which feels a bit sloppy but doesn’t rattle and always responds perfectly. Behind that is a light which changes colour for battery life and also illuminates for various other functions.
The squonk bottle and battery are inserted from the base via removable caps.
The squonk bottle cap has a latch so you only need to turn it 45° and it opens. The battery cap however is fully threaded and is a pig to grip and takes forever to screw and unscrew with a long threading portion.
The squonk bottle is nice and soft but doesn’t always return to its shape straight away – it can take a few seconds to suck back. It is also quite darkly tinted which I don’t like.
Aspire Revvo Boost Tank
This is a really pretty tank to be honest. The mixture of black plastic and metal to match the colour of the mod body make this look lovely.
The small glass portion of the tank is super easy to see through.
The airflow adjustment on the top is really smooth and easy but you do have to look closely to see what setting you have it in as it’s not always obvious.
The top cap includes the drip tip so it doesn’t appear to be replaceable.
Just like the mod the build quality is superb and it feels and looks so well made.
How Does the Aspire Feedlink Revvo Squonk Kit Perform?
Press the fire button 5 times quickly to turn on or off.
Press the fire button to vape
Squeeze the bottle to fill the tank
The battery capacity remaining is indicated on the light around the fire button.
3.9-4.2V(50-100% capacity) = blue light
3.5-3.8V (20-50%) = pink and blue light
Below 3.5V (0-20%) = pink light
The indicator light also illuminates when any of the following faults occur:
Flash 10 times when firing = fire button has been held down for over 10 seconds and firing will stop
Flash 2 or 3 times = short circuit
Orange light flashes 15 times = battery level too low to fire
Blue and Orange stays lit = mod temperature too high – over 75°C
How To Install The Battery
You are not able to charge the battery with it installed on the mod. You don’t even get a USB cable in the kit – so make sure you have a good brand external battery charger at hand and know all your vape battery safety.
Unscrew the battery cap on the base of the mod.
Install a 18650 battery with the positive end going into the mod and the negative end at the battery cap end.
Replace the battery cap.
Aspire Revvo Boost Tank
The tank is filled via the bottom feed squonk pin – simply squeeze the squonk bottle and watch the tank fill.
Whilst using if there is liquid in the tank you can tip the mod/tank over to splash more e-liquid onto the base of the coil.
You can adjust the airflow of the tank to your preference using the airflow control ring. More of the airflow slot exposed = more airflow and less exposed = restricted airflow.
One other thing to remember is although you can use the radial coils from the original Revvo tank – they are a slightly different resistance. The ones in the Revvo boost are 0.1-0.14ohm and the original ones are 0.1-0.16ohm as these were coupled with more powerful kits originally.
How To Fill The Aspire Feedlink Mod Squonk Bottle
Oh god this is sooo messy. Gripping the bottle to unscrew or screw on the top cap results in e-liquid weeing out the top so have plenty of tissues on standby.
Push the bottle securing cap in slightly and turn until the cap is released.
Pull the bottle from the mod.
Unscrew the metal cap on the top of the bottle.
Fill the bottle to the level required.
Replace the bottle top cap.
Install the bottle into the mod.
Align the tabs on the bottle securing cap and turn to lock.
How To Change The Coil Head
Remove the tank from the mod.
Remove the top chamber from the tank.
Unscrew the coil retaining nut.
Pull the ARC coil from the tank.
Install a new coil and make sure it is aligned with the side of the tank.
Replace the retaining nut.
Replace the top chamber.
Place the tank on the mod and fill using the squonk bottle.
Leave the tank to stand for a few minutes to prime the coil head.
Flavour & Cloud Production
This is a sub ohm tank so you will need high VG e-liquid.
I used one of my favourite IVG E-liquids the Blackcurrant millions which is 70% VG and I added nicotine to make it 6mg nicotine strength.
For an explanation of what VG and PG mean in regards to e-liquid read our handy guide.
The included coils are the radial ARC coils – the resistance can fluctuate but Aspire rate these at 0.1-0.14ohm and they are best at 70-80W.
Aspire Revvo Boost Tank Performance
So after filling I left this for about 10 minutes to soak up the liquid from the tank. You can only fill this via the Squonk pin I think – I am unable to get the top cap off anyway!
Straight away this blew my head off!
I had to close the airflow down a lot as it is super fierce with the airflow fully open! Wowee!
The flavour is beautiful too – am so surprised with this – I wasn’t really sure about these radial coils but wow I am a convert.
I only got 1 dry hit which was when the squonk bottle level was low and it didn’t seem to push much liquid up into the tank – so you simply just tilt the whole thing to soak up the liquid in the tank section of the Revvo Boost.
You can also leave re-squonking until the tank is almost empty – initially I kept the tank portion quite full but as I have been using it I keep forgetting and it’s quite happy to have the tank level pretty low. Don’t let it run dry though or you will damage your coil and your lungs!
I tend to use this with the airflow almost closed as to me it feels so powerful. Having recently reviewed the Horizon Falcon and used that at 100W this still feels more powerful.
I am on my 9th day of coil use and it still tastes as good as the first day.
In use it is comfortable, responsive and super powerful.
There is a battery life indicator – which although is difficult to see is very useful and as a bit of a novice I appreciate all the safety protections in something which performs and looks like a mech mod.
When the battery indicator light changed to the two colours (20-50% left) I felt the power weaken slightly. With a fully charged battery the vaping power almost blows your head off.
I thought this had a regulated power circuit (keeping the output stable despite battery power) but it is more like using a regulated mod but in by-pass mode. The output does drop as the battery level drops.
The biggest flaw of this whole kit is the battery life. It is quite frankly pretty terrible. As you can see below.
The battery life will depend on what batteries you are using, your vaping habits and also if you use a different tank or coil resistance.
This kit can be quite confusing when it comes to choosing a suitable battery. This is a semi-regulated device which has 0.1ohm coils and apparently can chuck out up to 80W. This means you need a pretty hefty battery to cope with that. In fact Aspire themselves state you need a battery capable of 35A output – which doesn’t exist.
I even asked the wonderful Mooch for his opinion and he was stumped and has contacted Aspire to see what battery they recommend.
Initially I used a Samsung 25R battery in here and got only 2 hours of vaping. This wasn’t my usual heavy vaping either as this blew my lungs out – so it was just regular vaping. The 25R is max 20A continuous output and 2500mAh capacity.
Beyond 1.5 hours the output was pretty weak anyway – which for most people would prompt them to swap for another battery.
After thinking some more we got some Sony VTC5A batteries thinking they might be more suitable being a 25A CDC (Continual Discharge Current) and 2500mah capacity.
With the VTC5A the output seemed slightly weaker – it wasn’t blowing my head off like with the 25R.
However the battery life was slightly better at 3 hours.
Such a stylish looking kit
Easy to change the coil for people with rubbish hands like me!
Easy to use with one hand – and fine for left or right hand use.
Rugged feeling solid mod
Suits tank perfectly
Full of safety features despite looking like a mech mod
No leaks in normal use (except over-squonking)
Responsive fire button
No rattles or wobbles
Appalling battery life – huge con!
Matching tank overhangs the mod slightly!
Hard to see the battery light when vaping – which is when it lights up!
Over-squonk and the liquid pours out of the top airflow holes
Can be messy to fill and replace squonk bottle
When level low in squonk bottle it pushes air into the tank and liquid out of the airflow holes!
Horrendous battery cap
Tinted squonk bottle makes it hard to see liquid level
Can only use designated squonk bottle
Final Review Verdict
When you are vaping on this it is just so perfect you almost forget the flaws it has.
I own a Wismec Luxotic and have paired that up with the Vandy Vape Maze tank. The Luxotic is a very similar device to the Feedlink and the Maze tank uses similar coils and has a similar capacity to the Revvo Boost – but I pick up the Aspire kit in preference now!
The epic performance however comes at a high price. Battery life is awful – really awful. I got around 2 hours of regular but not super heavy vaping from a Samsung 25R. After 1.5 hours the output was so poor it wasn’t really much use to vape on. Changing the battery for a Sony VTC5A improved the battery life slightly but the vaping experience was a bit weaker?
Sadly also there are quite a few design flaws…
I found the battery cap horrific, it’s hard to grip to turn and has about twelvety million threads on it so it takes forever to change the battery. When you couple this with how often you change the battery on this – it’s not good at all.
The squonk bottle is a unique design so sadly swapping it for another brand is not an option. It is too darkly tinted to see the level in all lights and it’s really messy to fill and replace. You end up squeezing it to replace the lid and when putting it in the mod – covering you and all your possessions in e-liquid. Well I am super clumsy though!
The looks of this kit are absolutely stunning but they are spoilt slightly by one silly oversight. If you have a matching tank for a mod and include it in the kit – try and make sure the tank doesn’t overhang on the mod it is designed for – bit silly that.
Geekvape has released the Alpha Sub Ohm Tank. The device was supplied with a sliding topkep on the lock, an epoxy drip tip 810 and an expanded 4 ml bulb.
Geekvape presented an Alpha Tank device on instagram . The housing of the maintenance-free tank was made of stainless steel and supplemented with epoxy resin coating. On top of it, the 810th driptip of similar material was placed, the color of the tank. The filling hole was hidden under a sliding cover with a lock with a characteristic “open” button. Bottom set a massive ring with notches to adjust the torque.
The tank works with branded vaporizers on Egyptian cotton mesh from the MM line. The device is equipped with a pair of options with a resistance of 0.15 and 0.4 ohms, the optimum power for them is marked in the range from 60 to 95 watts. The evaporator is fixed between the base and the firebox without the help of an internal dome. The volume is 2 or 4 ml, depending on the selected flask.
The package includes two evaporators, additional glass, a set of spare parts and instructions.
If you have been watching the activities of Wotofo for a long time , you should know that the manufacturer updates its product range in batches of several devices. As I already told you, just a couple of days ago I heard the good news, the company released new products. Now it’s time to look at what the manufacturer prepared for us in its next serviced tank – Viper RTA .
In the review on Flow, I said that the tank cannot boast of any unusual design, and about the Viper RTAI have the same opinion. Yes, this tank is already available in two color options, but there is still nothing interesting in it. Unless, of course, we consider the decorative element of the recess in the cover of the atomizer and the blowing adjustment ring.
Height – 40 mm.
Diameter – 24 mm.
Weight – 39 g.
What makes me happy in products from Wotofo, so this is what the manufacturer is absolutely not afraid to experiment with the characteristics of their devices and every time tries to show something new. This time, the most interesting part of the atomizer for me was its serviced base. Nowadays, both the vapers themselves and the manufacturers pay great attention to the capabilities of atomizers in terms of “pile-up”. In this regard, both the diameter of the devices themselves and the size of the racks are growing.
For this reason, everything that does not look like something huge and powerful is surprising users. I honestly did not expect to see what the manufacturer offers us, but that didn’t make my impression worse. So, at the disposal of the user is the base, consisting of two racks, designed for the installation of one spiral. The legs of the spiral are fixed with cross-head screws. If you believe the renders provided by the manufacturer, then the holes are not very large. Anyway, nobody tries to put something very powerful in atomizers of this format.
The capacity of the tank for liquid is 3 ml. All charged in an elementary way – the holes under the top cover. Buck received a fluid control system. As for the airflow system, here we have the lower airflow, but somewhat modified. The air enters the evaporation chamber from the bottom and is fed to the spiral in just one slot. My overall impression is positive. I am sure that the quality of taste will be very, very good here.
Packaging on the Vaporesso Swag kit is very nice, as always with most Vaporesso products. On the first tier of the box, you will get the mod, the tank, and a spare coil. Below the plastic insert of the box, there is a high-quality USB cable included.
First impression on the Swag Kit, it looks very much like an Eleaf Pico or a Smok Baby Alien mod. It’s one of those mods that takes a single 18650 with the raised battery cap. It’s a nice form factor and I do like the design. The nice thing about this mod, as opposed to the other two that I just mentioned, is that Vaporesso tends to use a much better chipset. Let’s see if that holds true for this kit. I’m going to put some batteries in it, juice it up, and see how it actually performs.
WHAT’S IN THE BOX:
One Swag 80W TC Mod
One NRG SE Sub-Ohm Tank
GT2 Core 0.4 ohm Coil
GT CCELL 0.4 ohm Ceramic Coil
Spare Glass Tank Section
One Micro USB Cable
FROM TOP TO BOTTOM:
Starting off at the top of the mod, we do have a raised battery cap. It protrudes out from the top plate of the mod quite a lot. The battery cap is black and it does have some knurling around it. Threading on the battery cap is very smooth especially at the beginning of the threads. Towards the end, it does tend to get a little crunchy but I think that has to do with the resistance of the installed battery more than it does with the actual threading. On the interior of the battery cap, we do have a negative battery orientation marking. Inside the battery tube, there is also a positive battery orientation marking. The battery contact on the bottom of the tube is gold plated and spring loaded.
On the top side of the mod, straight across from the battery cap, is where the 510 connection is located. As with most Vaporesso mods, the 510 connection on this mod is pretty damn good. There is a gold plated 510 pin that is spring loaded and it has a firm, long throw to it. So far, all of the atomizers that I’ve used have sat flush on this mod. Around the 510 there is a stainless steel plate. It is totally smooth with no indentations or cutouts whatsoever. The one downfall of this sort of mod is that it really limits you as far as other atomizers go. Because of the battery cap, anything larger than 22 mm will just not fit on this mod.
With the screen facing you on the right side of the mod, we do have a sort of carbon fiber look. I really don’t think it’s a sticker, it looks to be more of a plastic piece with a carbon fiber image imprinted on it. On the top of that panel, there is some Swag branding. On the side of the same panel, there is also some Vaporesso branding. All branding is very subtle because they do it in colors that are very close to the shades of the body of the mod. Right below The Vaporesso branding, there is a charge update port. This mod is firmware upgradeable. The port also supports 2 amp internal charging. That’s a really nice feature to have on a single 18650 mod. This mod charges quickly when plugged in.
On the left side of the mod, there is some more Swag branding towards the top. Towards the bottom of the mod is where is the plus and minus buttons are located. If the screen is facing you and the plus and minus buttons point towards the floor, the plus button is on the left and the minus button is on the right. There are no button orientation markings. I really hate when companies do that. How hard is it to slap a plus or minus sign on the button?
The good news is the plus and minus buttons are clicky and responsive. They are somewhat embedded in the mod. They really don’t protrude at all from the surface of the side of the mod. You kind of have to stick your finger in there in order to access them. The button is rectangular in shape and it seems to be made out of plastic.
On the bottom of the mod, we do have some battery venting that is arranged in a circular pattern. This pattern occurs on both sides of the bottom of the mod. Each circular pattern has 6 vent holes. On the backside of the mod, opposite the screen, there is a black panel with some silver accenting around it.
On the front of the mod, there is a .91 inch OLED display. It’s a nice size screen for a mod of this size. It’s a little bit on the dim side and it will give you some trouble viewing it in outdoor lighting conditions. Inside, it is not a problem at all. On the screen, you will be able to see your resistance, battery life, wattage, preheat, and applied voltage. Lots of information for such a little screen.
Located above the screen is the fire button. It is oval in shape and it seems to be made out of metal. There is some type of swirling effect on it that gives it a light texture. The fire button is clicky and responsive but I do wish it was a little larger. It’s fine as far as the size goes when you compare it to the size of this mod but I always prefer fire buttons that are a little oversized.
Below the screen, we have the mode button. The mode button lets you scroll through different options in the menu system. It has become a staple with Vaporesso mods. They have really done a lot in the industry when it comes to 4 button mods. I wish other manufacturers would follow suit when it comes to adding another button. It definitely makes the menu systems more simplified when you have a dedicated menu button. Unfortunately, with this mod and other recent mods, Vaporesso has failed to take full advantage of this button but we will get into that in more detail later.
Overall, I would say the design of this mod is very compact and good looking. It definitely has a nice feel and weight to it. While the side panels seem to be made out of plastic, they don’t feel cheap at all. They do have a smooth feel to them and I wish that they had a little bit more texture to them in order to give the mod a better grip. I love the two-tone look of this mod and the way they put some of the color combinations together. The mod is available in black, blue, orange, and stainless steel.
The tank included with this kit is the NRG SE 22 mm Sub Ohm tank. It is a smaller version of Vaporesso’s NRG tank. Just like the big version, it does have a top fill system. There is an arrow located on the top cap. Push towards the arrow and slide the tank to your left to open it. It is very similar to a Smok Baby Beast sort of top fill. The only difference is the top cap slides towards the left and up instead of to the right and sideways. This tank does hold 3.5 mls of liquid.
The drip tip included with this tank is a sort of proprietary drip tip. I will explain, while it has a 510 opening, it also has a little cut out on the bottom that allows it to slip around a ring that is raised off of the top of the top cap. It does give it a very clean look. The drip tip is very comfortable, the only problem with it is if you do want to run your own 510 drip tips, you have to make sure that they match perfectly with the circumference of the protruding ring on the top cap. 510 drip tips will fit, but not all of them will look good.
The fill port for the NRG tank is located under the top cap, beneath the slider. It has a Tic Tac shape to it and there is a white gasket around it. You will be able to fit needle nose bottles in there with no problem but be careful with the bull nose types of bottles. It is a little too small for air to escape while you are filling it. It could get a little messy with those types of bottles and glass droppers. On the ring around the top cap, there is some Vaporesso branding on one side.
The base of the NRG tank has bottom airflow. There are two airflow slots located opposite each other on the base of the tank. The AFC is smooth and easy to adjust. It does have stoppers on both ends. This is a bottom airflow tank. On the base, you will see some Vaporesso branding as well as a serial number. The 510 pin on the NRG tank is silver-plated and the threading around the 510 is stainless steel. The threading is very smooth and so far, it has sat flush on every other mod that I have used it on.
This kit does come with 2 coils. One is the .5 ohm GT CCELL ceramic coil and the other is the .4 ohm GT2 coil. Because I received a very early pre-release version, I only received one coil. So, I cannot intelligently comment on the .5 ohm ceramic coil because I did not receive it. The only coil I received in my kit was the .4 ohm GT2 coil.
I do have to give Vaporesso credit. I love the way they rated their coils. I’m going to include a pic of their chart that shows all their ratings at different wattages as well as the different preheats. I think that is absolutely fantastic that they do this. I really do wish more manufacturers would follow suit when it comes to providing more accurate information and ratings as far as coils go. My only complaint is, I would like to see the material used in the coil imprinted on the coil itself.
As usual, I installed the coil and primed it first. I then proceeded to fill the tank up and I let it sit for about 5 minutes even though I primed it first. This is the way I like to set up most of my sub ohm tanks. I like to give the cotton inside the factory coils a chance to really soak up the liquid. The cotton on factory coils is usually packed in there very tight. Giving it time to soak up, definitely helps the coil break in easier when the coil is new.
After letting the coil soak for awhile, I started to vape it at around 40 watts, on normal preheat. I got some pretty good flavor off of it and I really didn’t get a very cottony taste. Maybe for the first pull or two but after that, the flavor really came on. Once I started to get full flavor, I cranked up the wattage to around 50 watts. The flavor definitely got a lot better and the clouds really seemed to come into their own. After that, I tried it at 60 watts, again the flavor was slightly improved and the clouds were indeed larger. I did push this coil as high as 70 watts in normal mode. To be honest, I felt like the flavor diminished, even though the clouds were slightly larger. I like this coil right around 50 watts. That’s where you seem to get the best compromise of clouds and flavor.
My one problem with this coil is the lack of longevity. It just doesn’t seem to last very long. While I only had one coil, I guess you could probably say I might have gotten a bad one. However, this has been my experience with most of the coils that I have tested in the NRG line of tanks. They are flavorful and cloudy out of the gate but they’re not much for distance. I would like to see Vaporesso improve the quality control on their coils so we can get some better coil life out of them. The good news with this tank is, even though the coils that Vaporesso makes may not be the greatest, it is cross compatible with Smok Baby Beast coils.
THE LOOK, FEEL, AND GENERAL AESTHETICS OF THE MOD:
This is a good looking kit that has a nice compact feel to it. It is a very easy carry and it’s extremely pocketable. I do like the fact that they recessed the plus and minus buttons. That makes it even more pocketable in my opinion because you have less of a chance of those buttons being hit while in a pocket or bag. It does have a nice smooth texture to it and it does feel very comfortable in the hand. It is light and very compact. I love the fact that Vaporesso was very subtle about the branding. There is no gaudy type of branding on this mod. If you like the looks of the Eleaf Pico or the Smok Baby Alien, then you are going to love this mod. I think it actually looks a bit better and after using it for quite some time, I know it performs better.
The Swag mod uses Vaporesso’s proprietary chip, which is the new to 2.0 Omniboard. This chip will fire as low as .05 ohms and as high as 5 ohms. It has a maximum voltage of 8.5 volts and a temperature control range of 200 degrees to 600 degrees Fahrenheit. The chip also has a full temperature control suite. It is capable of doing TC in Ni, Ti, and SS. There is also a wattage curve feature as well as a temperature control curve feature and a TCR function with two memory slots. I absolutely love the Smart VW mode. I think it is a huge win for newbies. What this mode does is as soon as you attach an atomizer in power mode, it gives you a suggested wattage. That is just fantastic for new vapers that may not know where to start. This is a pretty competent board with a ton of bells and whistles. It also has a bypass mode and of course, if you want to, you can simply run it in power mode.
THE MENU SYSTEM:
Click the fire button 5 times to turn the mod on and off.
Long press the mode button to scroll through the different modes.
Going into the system settings gives you access to VW Mode, VT Mode, Default, Smart Mode, Screen Timeout, Brightness, and Puff Counter.
In order to get into the system settings, scroll through the options in the main menu. When you get to system settings, hit the mode button three times. From there, you can adjust your modes, screen brightness, screen timeout, and puff counter. It is here where you can change the wattage in TC mode.
Hold the plus and minus button to flip the screen.
Hold the mode and the plus button to lock and unlock the device.
While this menu system has a lot of functionality to it, the way they laid it out is just way too difficult. There are just too many button presses that you need to do just to make very simple adjustments. I’m sorry, but that’s a poor job by Vaporesso, especially since we are using an extra button as opposed to most traditional menu systems. They really need to come up with some more efficient button presses to simplify this menu. There is no reason why this menu has to be so complicated with fourth button. They seem to have addressed that situation on that kit but unfortunately, the Swag kit has the same problem that the original Revenger menu system has.
HOW DOES IT VAPE?
It’s a really nice, high-quality vape. I find this mod to be extremely accurate in power mode and TC mode. Vaporesso does a great job with its chipset as far as accuracy goes in both power and TC mode. I get a very satisfying vape off of this setup. While the coils may not be the greatest, they can be replaced with Smok Baby Beast coils and that makes the NRG tank infinitely more enjoyable. While I am not the sort of vaper that is into those curve modes, I know a lot of people out there enjoy them. If you do enjoy wattage curve or TC curve, you are going to love this little mod. It’s an 80-watt little powerhouse that vapes really well. It has a tank on it that is very flavorful and aside from the coil longevity, this is a high-quality kit. The coil longevity is an easily solved problem. When you buy replacement coils, just buy Smok Baby Beast coils.
WHAT WOULD MAKE IT BETTER:
Simplified Menu System
Better Quality Coils
Unfortunately, this mod suffers from the same fate as the original Revenger mod. There are just way too many clicks in order to access certain parts of the menu. So many clicks that it’s absolutely ridiculous, especially for a four button mod. When you add an extra button, that should significantly cut down on the amount of clicks you have to do in order to access certain parts of the menu. That is not the case with this mod or the original Revenger. It’s too bad, I know a lot of people gave Vaporesso that feedback and they still brought this mod to market with the same type of menu system. I wish they would have listened to their customers.
Another thing that they haven’t listened to is the fact that their coils are just not that great. They’re okay, but when you compare them to other coils in the same subcategory, they are a bit under par. They definitely need to tighten up the QC on their coils. Maybe do something a little different, or use some other type of material but the way they are right now, they just don’t last long and the flavor is not as good as some of its competition in this category.
Most of you that read my reviews know that I am a resident of New York City. Because of that, I tend to commute a lot and take a lot of public transit. I like little setups like this that I can put in my pocket and quickly vape while I am between buses or trains. For that type of setup, this is a nice little kit. I have used it as my commuter mod for quite some time now and I have to say that I really like it. It is also a very competent backup setup. You can easily slip it into your pocket and keep it as a backup mod should you be away from home longer than expected, you can always pull it out of your pocket and vape on if your main mod runs out of battery life. I use it on those occasions as well. It’s also great for a beginner. The reason it’s great for a beginner is because it has a Smart VW mode. You can screw on a new atomizer and the mod will automatically give you a suggested wattage according to the resistance of your coil. That is just a fantastic feature for newbies who don’t know where the start. It’s a little bit of a complicated menu system in order to access all the bells and whistles but if you just want to put your tank on and vape, it’s a great system.
I would definitely recommend this mod to anyone looking for a solid performing, single 18650 mod. It comes with a good tank even if the coils are not the greatest. Like I said before, that’s an easily solved problem because the tank is compatible with plenty of other coil systems. When you buy new coils, you can just go to another manufacturer. There are plenty of companies that make Baby Beast compatible coils. If you are looking for a stealthy little powerhouse mod with a really good tank and nice build quality, definitely take a look at the Vaporesso Swag. If you like that Pico, Baby Alien look but you want better performance, this mod will out perform them both. Definitely the best battery cap exposed, single 18650 mod, on the market right now.
Smoant has made some popular mid-range mods in the past with the Battlestar and Charon. However, it’s been a while since we have seen we have seen anything new.
Enter the timely release of the Smoant Cylon 218, an altogether more premium looking dual 18650 device, which not only features an eye-catching design but an updated chip, a gorgeous 1.3-inch TFT color screen, and extra customization options.
Could this be the best device out of the Smoant factory?
Premium looking and feeling device, with an excellent color display and impressive performing new board from Smoant.
Quite large for a dual 18650 device and doesn’t accommodate 20700’s.
The Bottom Line
The looks, size, and style of the Cylon 218 may not be for everyone. But there is no doubting this is a very good device, that’s remarkably well-built with a brilliantly performing new chipset from Smoant. Worth the wait.
1Design & Build Quality
The Smoant Cylon 218 is almost tank-like in its construction; it feels extremely solid in the hand and is made from sturdy, robust materials.
At first glance, the Cylon does bear a striking resemblance to a YiHi SXmini G Class with it’s centered screen and 510 connection
However, it’s not the most compact dual 18650 device, measuring in at 90 mm x 47 mm x 32 mm. This may not be an issue for some who like a larger solid device, but in comparison to something like the Eleaf Invoke (which is also a dual 18650 device), it’s a far heftier mod and a little too big for my liking. The larger frame wouldn’t be an issue if it could accommodate 20700 batteries like some of its peers, but sadly, no, the Cylon is solely an 18650 device. Why Smoant didn’t opt for larger battery compatibility I do not know; it seems like a strange move.
Size and battery compatibility aside, the Cylon 218 does feel like Smoant’s best-constructed device to date. It has a zinc alloy body, with faux-leather inserts on both sides, with crocodile skin like texture to them which really helps to improve grip. It also offers up a stylish premium look which wouldn’t look out of place on the inside of a high-end car.
The 1.3-inch TFT color display is located right in the center of the mod, and it sits recessed by a few millimeters which should offer it some extra protection against knocks and scrapes. The screen is certainly one of the best features of this mod, with vibrant colors and a high-resolution display everything is crisp and clear.
Smoant definitely made an excellent choice here, and they have tried to back up the display with the inclusion of different screen layouts and some funky wallpapers. That being said none are really to my liking to display on my mod (not even the happy Labrador, unfortunately) but with the latest firmware release version 3.08 it seems you can actually customize your own – not something I tried.
The Cylon mod has one of the best spring-loaded 510 connections I’ve come across recently. The 510 plate sites in the middle of the mod (a popular and more welcome position) and it can accommodate atomizers up to 30-mm with no overhang whatsoever. Being such a substantial device, I actually think that larger atomizers look far better on top, dinky 22mm attys look a little lost.
The rectangular fire button on the Cylon did spark some early negative comments from some reviewers. This was due to quite a bit of play and rattle, but I think that may only have been present in pre-production models as the device that we have has absolutely no issues whatsoever. The only one thing to note is while you can press anywhere on the button to fire, it tends to work best when pressing towards the top.
The function or up & down buttons site just beneath the screen, and again these work perfectly fine, but they are a little small and require a good solid press to click. They are not bad buttons; I would just have liked them a little larger.
You can normally gauge the build quality of a dual 18650 device by the design and implementation of the battery door. Smoant has gone down the route seen before of a hinged bottom door, and it is done well. There is a little wobble to it when it’s open, but as soon as you lock it in place, everything feels solid and fits seamlessly.
There are a couple more design choices and accents on the Cylon that help to finish off the premium look. On the front and back, you can find small curved hollows with tiny silver hex screws that hold the main body in place. Then on the rear of the device, there’s a round blue and white acrylic logo, which thankfully is not a pointless LED light. My initial thought was it looked a little out of place, but now it’s kind of grown on me, and I think it adds a little more originality to the design.
Even though I’m not a huge fan of the size of the Cylon 218 for a dual 18650 device, I have to say it is extremely well designed and built. The screen is great, the leather accents are a nice touch, and it is without a doubt the best-looking device I’ve seen from Smoant to date.
The Cylon 218 comes with the new and improved version 2 of their Ant board. Smoant makes some bold claims of instant firing of 0.15 seconds, and I have to say my experience seems to back this up. I have no tools to measure, but it is certainly no slouch and definitely on par my VooPoo Drag (another quick firing device).
The Ant 218 board comes with a full temperature control suite as well as TCR functions and Curve Modes for both Power and TC mode. You get the usual present for TC with Ni, Ti, and SS. I only tested (as usual) in SS mode, and do think there have been some improvements here – more on that later.
When it comes to power, the Ant 218 V2 chipset is capable of a maximum output of 218 watts (hence the name). Again not something I can give you an exact figure on, but I’m fairly confident it is reaching near that level – as this thing hits hard and hits quick.
The board also has three preheat settings that include minimum, normal, and maximum. Be careful when you first get the device, mine was set to maximum, and it took me a little while to figure why I wasn’t enjoyed the harsh instant hit. I know it’s common ground nowadays to have preheat settings, but Smoant has done a good job of it here, and I definitely notice the difference between each setting.
The long and short of it is this thing is an all-round performer. You get an excellent vape in either power or TC mode.
In power mode, it hits hard and fast, ramping up even the beefiest of coils in next to no time. Power curve mode also seems to work exactly as advertised, with simple on-screen adjustment so you can quite easily tailor your vape experience. Not something I tend to play around with much, but again it is well implemented.
What surprised me the most was the TC mode on the Cylon. Not because Smoant’s past devices were notoriously bad at Temp Control, they weren’t. But I wasn’t expecting it to be this good. I tried several different builds and resistances on simple round wire to dual fused Clapton, and the Cylon handled them all excellently. It seems to be almost on par with the Gene chip which I have raved about recently. I also tried vaping my wick dry, and the protection was on point.
However, there is one slight issue. It does seem to run a little overpowered in both watts and TC modes. Not drastically, but I would say in comparison to my DNA board it was definitely running hotter. So don’t just dial in your usual settings, do play around to find your right sweet spot.
It seems Smoant didn’t just take time in releasing a new device to improve the externals, but the internals as well. A smart move which seems to have paid off with an excellent performing board in the Cylon.
Excellent large color screen
Can fit 30mm atomizers
Easy menu system
2 amp Charging
Solid battery door
No 20700 battery compatibility
Up & Down buttons are a little small
The Smoant Cylon 218 was worth the wait. I’m glad Smoant didn’t just follow other manufacturers by releasing devices just for the sake of it.
The Cylon has been well planned, both inside and out. It has an excellent new board, that is impressive in both power and TC modes and comes with a ton of new features. Add a gorgeous TFT display a centered 510, premium looks and build quality, and you have the perfect device – well not quite.
There is one reason, and one alone that I probably won’t gravitate to using this device over others. It’s just too large for a dual 18650 device.
Now we are seeing most other manufacturers jumping on the bandwagon of dual 2×700 devices, some which even come in smaller packages than this. I think Smoant may have missed a trick here.
I credit them for being patient and building an excellent product before releasing it, but it would’ve been even better if it could take larger batteries.
However, if you’re in the market for a dual 18650 box mod, this is a fantastic choice. And who knows maybe Smoant have a 20700 version up their sleeve?
Augvape has become very popular thanks to a friend’s drip . About this dripka reviews took off probably all the bloggers in the field of vaping. And the engineers presented the electronic box-mod Augvape V200. A fashion tweak is a metal case that is styled to fit the cylinder head of a Honda car engine. Surely the emphasis in the creation of this device was placed on fans of this brand of car.
Comes mod in a plastic box that looks very presentable. Inside the box-mod, a branded USB cable that looks very nice, albeit a bit short, about 0.5 m, USER-manual (color, English language), card for participating in an inste party in Augvape.
Information for information
Augvape V200 mod is made of zinc alloy and is available in three colors: white, black (matte), red, has three modes of operation: varivat, mech mode – Bypass and another varivat mode – V Mode, raises the mode from 0.05 Ohm It works on two 18650 batteries and is capable of charging them with a current of 1.2 A.
Dimensions: Height: 90 mm Width: 45 mm Thickness: 29 mm Weight without batteries / with them: 165 g / 258.2 g
Technical parameters: Operating modes: varvatt / bypass / V Mode, Operating resistance: from 0.05 to 3 Ohms, Output power: from 5 to 200 W, Output voltage: from 0 to 8.4 V, Input voltage: from 6 to 8.4 V, Battery charging current: 1.2 A
Located on top of the steel connector. The positive pin is gilded and has a tight turn, which will have a good effect on contacts with the atomizer or drip. The half-millimeter connector platform rises above the main body part and thus the paint on the body will not scratch and peel off. You can wind the atomizer up to 30 mm due to the central location of the connector and a large area of landing.
The body is metal, painted with matte paint. Fingerprints remain in the black version. On the red and white this was not observed. Parts of the case are connected with screws. The main part of the mod has a monochrome display, the size of 0.96 inches.
Fire button stylized display, slightly toned. The contact area of fire is approximately 12 mm by 12 mm. Under the button there is an LED that starts to burn only at the moment of pressing and during the day it is not visible at all, only in the dark of the day. Next to the “Start” button there is a wheel, which acts as the “minus” and “plus” buttons. There is also a port for connecting a USB cable.
At the bottom there is a battery compartment lid that walks a little on the hinges, but closes adequately, did not open itself during the tests. The lid has a battery label and polarity. Also implemented charge balance system.
Mode Control and Modes
The mode turns on after the fire button is pressed 5 times. The combination of the fire and minus buttons locks the wheel, while the fire continues to work. On the display all the necessary information: voltage, winding resistance, current, battery capacity.
By and large, in the boxing mode there are essentially 2 main modes: varivatt and Bypass. V Mode is also a variation and there is not much difference with the usual variation. The mod does an excellent job with resistance of 0.05 ohms, so there should not be any problems in burning the spiral. The board works very quickly after clicking on the fire. The modic is charging for a long time, since the charging current is only 1.2 A. At the same time, the long process of charging the batteries is beneficial for their lifespan upwards.
The device turned out to be interesting, the board works adequately. There are no thermal monitoring modes and therefore some such vap will not enter. In general, there are no complaints about the operation of the device. The only point is to the size of the mod. Thickness and width – everything is fine here and it’s nice to hold it in your hand. However, the V200 is tall. With atoms such as Griffin AIO or the popular TFV12 and TFV12 Prince, the bond will be very long. And so all is well.