The next day begins with a new AIO set. This time Dovpo distinguished itself. Basically, they rivet the device more seriously, however, and mainframe products do not disdain. By the way, there are not so many similar examples in their assortment range, therefore with pleasure I suggest to get acquainted with the recruit.
Dimensions: 89.8 x 39 x 18.4mm Weight: unknown Case material: zinc alloy + plastic Power: built-in 650 mAh Cartridge capacity: 2 ml Evaporator resistance: 0.8 / 1.4Ω Output power: 8 / 15W Operating mode: POWER Protection:Low / high resistance, overheating, short-circuit, overcharge / overdischarge Connector Type: Magnetic Shield / diagonal: No Micro-USB port / charging is: eat, USB Type C, the charging current is 0.65A Color: see photo below
Options – Peaks mod – replaceable cartridge (pre-installed) – 2 pcs removable evaporators 0.8 / 1.4Ω (one pre-installed) – Lanyard – USB cable – user manual – warranty card
Well, form factor, we have a sign – it is something like the well-known lighters. The hinged lid and its opening mechanism are absolutely identical to the “natural” one.
The decor is peculiar – one can say to an amateur – the side panels are “dazzled” with prints. Dimensions do not say that large – rather average.
A replaceable cartridge of standard capacity, it will be refilled from above, which means there is no need to remove it from the mod. Drip type is removable, but the dimension is its own – do not roll your lip about your copies. Replaceable evaporators are offered two types – one on the grid (for dt), the other on ceramics (for mt). That’s just blowing adjustment is nowhere to be seen.
The mode itself hides within itself a not very capacious built-in battery, the full charge cycle will take about one hour. The causal connector developers defined at the bottom, moreover, it is also Type C. By the way, on the case you can see a tiny hole to control the level of filled fluid.
On the front side, there is a key for changing the output power – only two options are provided, plus there is a seven second prehit. Slightly below the LED indicator. Fire buttons no – activation by tightening.
By the way, in the box you will find, among other things, a lanyard for wearing around your neck.
Colorful Flower Wall Stickers are cool, cheap, fast to lay and are spectacular. It is an indispensable solution if you want to make a great impression at affordable cost and if you do not have enough room for great furniture and accessories, especially that there are motifs that always go perfectly with any interior and that give an extraordinary effect.
Flowers that will not stop blooming:
Your apartment can look blooming all year long! Flower Wall Stickers with floral motifs make an optical illusion as if they stand out from a wall, above the bed or around a window frame. With different patterns, you can make a new flower arrangement. Such a refreshed interior will surely enchant your friends!
Multicolored flowers become an increasingly popular decorative motif. If you like decorating in flora and fauna, try to enrich it again. Instead of simple dots, place on the wall. Try small flowers, butterflies, round planets or abstract patterns. We strongly recommend this idea, especially for the nursery.
How does Flower Wall Stickers help in soothing our vision?
Wall Art Stickers
Nothing is more soothing than the sight of juicy fruits. And it’s no wonder that colorful stickers in the shape of sunflower, jasmine and other florals give a remarkable effect in your decor.
If you want to tie what’s beautiful with what’s practical, use stickers to mark appropriate compartments of kitchen furniture: spice cupboards with a sunflower shape, vegetable drawers with a daisy, and the trash side with some other floral pattern.
Which are other patterns can be used for home decor?
Everyone can not afford to have a modern brick wall but non-woven wallpaper or wallpaper design that represents it is a good solution if you have a large area to fix.
But if you do not want big changes, and you want to have an industrial decoration, colorful stickers with a pattern of bricks or natural moss will all be right.
Choose a style that interests you and buys a sticker ready to pose in the form of images perfectly composed in terms of arrangement and patterns. If you would like to customize your gallery, nothing simpler the arrangement of sticker parts can be freely changed and the set combined with other wall decorations. Here one can also opt for Flower Wall Patterns to be used smartly.
Practical decorations for children:
Yet do not forget the traditional use of all these colorful floral patterns: as a wall sticker or decoration for furniture in the child’s room.
Kids Room Wall Stickers
The room of our children should not be cluttered by the surplus of toys or useless accessories. All the superfluous decorations can be easily replaced by original stickers with a 3D effect.
Such a small change can engender a superb and original effect even with Flower Wall Stickers. So always consult a designer for getting an idea on how to wisely use this floral sticker and where to use it ideal even if you like them a lot.
Flower Wall Decals | Flower Wall Stickers | Flower Decals – WallPops https://www.wallpops.com What better way to brighten up a room than flowers wall decals? Our peel & stick flower wall decals bring the beauty of nature inside with colorful blossoms of the .. Things to know before choosing a sticker – Homerise Design http://www.homerisedesign.com/things-to-know-before-choosing-a-sticker/ Jan 11, 2019 – Most of the houses are choosing stickers as a part of their interior designing. The stickers not only help … If you are planning to buy a wall stickers there are things you will need to consider.
Well, and finally I will tell you at once about two updates from the company Freemax. As you remember, their main specialization is non-service, therefore the newly-made tanks also did not become an exception. In addition, the developers offer two versions at once, since their TX is absolutely identical, we will get acquainted with all the crowd.
Our guests look pretty decent, they are not knocked out for conventional canons in this segment. Unless it is possible to ascertain – they are rather small in height.
As you have noticed, the only difference is in the design – in the metal version you can only see bare metal, while the version of graffiti was decorated with plastic with bright prints.
So the first will be offered in the following options.
The colored version also does not lag behind in the number of colors offered.
Drip types 810th landing, from version to version differ – so in the plastic version they are made of plastic, whereas in the metal they are logically made of metal. The cover construction is identical – it is sliding, under it is a medium-sized filling hole.
The capacity is frankly small, but the complete bubble glass will make it 2.5 times larger.
With replaceable evaporators there is perfect abundance here. True, in the box you will find only two types. Well, in general, new items can digest just an incredible number of different evaporators from this manufacturer. You can say this is a kind of generalists – stick what you want.
The airflow is regulated by a rotating ring with a stopper. Air inlets of a decent size are understandable, because they should be serviced, both by low-resistance units and evaporators with a fairly high rate.
Pin is gilded and acts on both versions enough.
Adequate price tag, I have not yet met any of these copies.
Just a couple of years ago, vapers could have been surprised by almost any novelty that was somehow different from the “little one”. Now the situation has changed significantly – vapers have become more demanding and sophisticated, since you can’t surprise anyone with either the DNA board, or the color touch display, or the built-in MP3 player. Therefore, manufacturers constantly have to invent something new, gaining the trust of vapers with quality and original design. It is on this principle that Teslacigs works – it is enough to recall its legendary Punk or WYE series. Not so long ago, the new starter kit from this Chinese manufacturer Teslacigs P226 kit was released, which uses a familiar to many vapers board (it has already established itself on the positive side) and a new military-style design. Knowing the fact
Teslacigs P226 kit is a starter kit consisting of a compact box-mod for two batteries equipped with a powerful proprietary chipset and an atomizer of its own design, which is designed to work with replaceable evaporators. The company’s developers paid special attention to the design, so the P226’s box-mod is made in an army style – it looks more like a machine handle or an activator for a bomb. The device uses a chipset familiar to many vapers, which, despite its seeming simplicity, is distinguished by reliability and stable operation. This starter kit is equipped with a Tind Tank atomizer, which works on replaceable evaporators with a resistance of 0.18 Ohm, which ensures its taste and bulk. You can buy Teslacigs P226 kit in four colors – gun metal, steel, red and green.
As in most starter kits of this class, the Teslacigs P226 kit is equipped quite standardly, but so that the vaper can use it right after the purchase. Therefore, in the traditionally simple corporate box you can find:
Box mod P226 Mod;
Tind Tank Atomizer with preloaded T-X3 Coil evaporator (0.18 ohms mesh coil) and 4.5 ml glass;
If you ask the vapers what device from Teslacigs is known to them, then half will answer with the Nano 120W Steampunk, and the second with the Invader. The new box-mod can be called a worthy successor of these series, because the P226 Mod is made in the best traditions of the company. Designers decided to make not just a banal “brick”, but a more interesting “army” option.
Naturally, you won’t surprise anyone with military themes in the mods, but the P226 Mod will be pleasantly pleasing to many – there are numerous projections and grooves on the case, thanks to which the device looks more like an automatic magazine or a remote control panel with an explosive device. The similarity is further added by the large “fire” button, which is pressed with a barely audible click. But in any case, we can confidently say that the ergonomics of the device is at the highest level, as it sits very nicely in the hand.
The battery has been fitted with a battery of 18650 watts. It is very convenient to connect the micro USB connector located on the side.
If we talk about the P226 Mod chipset, then this is the standard branded chip from Teslacigs, which is used in most devices of the company. The functionality is quite standard – varivat, temperature control, TCR, but it will be quite enough for most vapers. Separately, it is worth noting the stability of the board – it shows “honest” resistance and “honest” Watts. For ease of use, the device is equipped with a small monochrome display with a vertical orientation, where you can find the necessary information for the vaper on the operation of the box-mod.
The fact that Teslacigs developed the Tind Tank atomizer specifically for the P226 kit is good news – it’s immediately obvious that the company’s specialists work for vapers. It cannot be said that Tind Tank is something supernatural, it is a standard “non-servant”, but at the same time a sufficiently high-quality one.
Atomizer works on branded replaceable TS-X3 Coil evaporators on a 0.18 ohm grid. Alas, but so far only one version of evaporators is available and only with such resistance. But due to the use of the mesh vaper will get great taste and bulk. Working capacity for such evaporators is 70-80 watts, so it is worth considering this immediately after installing the evaporator in the atomizer.
The volume of the Tind Tank is 4.5 ml, which is quite enough for a comfortable soaring of most vapers. Airflow standard – adjustable bottom. To refuel, simply unscrew the top cover and pour the liquid into a sufficiently large opening.
Conclusions and impressions
Teslacigs P226 kit is quite an interesting starter kit that many vapers will definitely like. Naturally, there are certain questions about the atomizer, but the box-mod will please with its functionality and design.
Advantages and disadvantages
Only one type of evaporator;
The top surface of the mod will scratch when replacing the atomizer.
Joyetech has released the eRoll Mac Advanced Kit. The device consists of a compact docking station with a capacity of 2000 mAh, a narrow 11-watt buttonless button and a pair of spare cartridges with ceramic evaporators.
On May 8, Joyetech announced an eRoll Mac Advanced Kit device on Instagram . The charging case was made in a smooth rectangular shape with rounded corners and a narrow profile. The color range is limited to three options – silver, red and black. At the end made charge indicators and USB-port Type-C.
The docking station has a battery with a margin of 2000 mAh, a full charge of no more than 2A can be carried out in 90 minutes thanks to an advanced USB port. Under the wide magnetic panel there is a bed for its plate and two additional cartridges.
Its dimensions resemble a cigarette lengthened to 100 mm. The replaceable cartridge is fixed by means of a thread, completed with a ceramic evaporator of 1.2 Ohms and holds 0.55 ml. For refueling it is enough to take a rounded driptip The battery has a capacity of 180 mAh. The charge connector is on the bottom. Activation occurs when tightening, the maximum power reaches a value of 11 watts.
The package includes three cartridges, a USB cable and instructions.
The team Lost Vape can put a monument for the fact that they have opened a new niche of advanced systems on the cartridges. There are few alternatives to Orion , but this topic is definitely interesting to the public. A new milestone in the development of this segment was launched by the guys from Smoant, unexpectedly rolling out a miracle called Pasito .
Let’s be frank and recognize that the designers of Lost Vape again worked better than all praises and the only way out for competitors was to “borrow” the format. Smoant was no exception, but still tried and rolled out a rather interesting product. Most of all in this toy I like the slim body and the cool combination Resinpanels and bright drip types. At the moment, only 4 colors are available, but I am sure thatSmoant will not rust and soon other versions will appear.
Height – 102 mm. Width – 38 mm. Thickness – 18 mm.
Interesting in terms of performance characteristics begin with the battery pack. Works boxing under the management of its own production board – ANT . The user has several power levels available – 10/13/16/20 / 25W. Switching takes place with a special button. Yes, there is no puff sensor and you have to work with your finger to activate the device 🙂
Atomizer resistance is limited to the following range – from 0.3 to 3 ohm. The battery itself is built-in and has a capacity of 1100 mah (3.2-4.2V). Here, the guys decided to show off a little and instead of the usual micro usb Type – C (5V / 1A) is used. I will not comment on the need and the practical side of such a decision – we simply count it as an additional bun. The device supports communication with the outside world through a standard LED indicator.
Here we come to the main highlight of the novelty. So, Pasito works on completely standard cartridges. Available evaporators – MTL / Ni-80 / 1.4 ohm; DTL / Mesh / 0.6 ohm. But this users decided not to limit. If you wish, you can purchase a full RBAbase on one helix. Cool? I believe that the idea will definitely find fans and has a future. The capacity of the tank for the liquid – 3 ml. All this is complemented by an adjustable top-blowing system.
I have repeatedly said that Juul became a phenomenon in vaping. Maybe this is not so noticeable with us, but at home in the USA this toy captured the market. This is not to say that the era of closed systems in the industry actually began with this device. Not surprisingly, such popularity has led to interest from other manufacturers. For example, Jmate are engaged in the production of accessories under the Juul and have already achieved some success. P
IMHO, this thing looks like that can cause a feeling of envy even among those who do not like Juul. Agree, very worthy, as for a regular accessory. For those who perceive vaping, as part of their style will be interesting. But this little thing not only looks beautiful, but also has useful functionality.
Height – 100 mm. Width – 56 mm. Thickness – 12 mm.
There are three compartments in the case – with a contact group for the battery and two for cartridges. The capacity of the built-in battery is 1200 mah, which should be enough for several recharges (5V / 500mAh). Charging of the bank itself takes place via micro usb (5V / 1A). Full charge cycle – 90 minutes.
Powerdrive car charger
In my opinion, the most successful (in terms of public interest) proposal of the manufacturer. As it is easy to guess, we have a car charger. The principle of work should be familiar to most readers. Roughly speaking, the power supply becomes a cigarette lighter, and at the other end there is a Juul compartment and a separate usb for other purposes.
– 12V / 24V; – 5V 500 mAh; – 5V 1A (usb).
Another poverbank, but made in a completely different format. And to be honest, it is even cooler than the first version! Owner go unnoticed with such a thing just will not work. In terms of performance characteristics there are some minor differences. First, the capacity dropped to 800 mah (5V / 1A). Secondly, it fits as many as three spare cartridges. Thirdly, a LED indicator appeared, the utility of which is difficult to overestimate.
Height – 115 mm. Width – 31 mm. Thickness – 29 mm.