Eleaf has released the iStick Mix Kit. The “epoxy” kit was assembled from a 160-watt two-battery box-mod box and an unattended Ello Pop tank with a rubberized bulb.
On March 28, Eleaf presented an Eleaf iStick Mix Kit device on instagram . The boxmod was packed in a rectangular case with rounded corners and a convex silhouette. The ends trimmed polymer panels that combine different patterns and patterns, in the palette of colors included five variations. A familiar set was placed on a narrow front side – a round fire button, a monochrome display and two control keys. USB port installed on the side. Batteries hidden under one of the removable sidewalls.
The branded Avatar Chip card supports varivatt, thermal control, bypass and several memory modes. Output power can reach 160 watts. Resistance ranges from 0.05 to 3.0 ohms. Two 18650 batteries are used for power supply. When charging via USB, you can use up to 2.5A current.
The body of the complete tank Ello Pop is made of stainless steel and is completed with an “epoxy” drip tip in the fashion color. The filling hole is under a massive firebox with protection from playful children’s hands. Glasses of plump flasks are surrounded by thin rubber rings. There is a rotating ring blowing with wide notches.
Recently, it is less and less common on the shelves of vape shops (including virtual ones) to meet the classic varivolts, which at one time were the most popular among vapers. They were replaced by simpler and more functional options, but this does not mean that the device format itself is forgotten, since from time to time well-known manufacturers release new items of this kind. One of the legendary devices in this class was the varivat from the well-known Chinese company Teslacigs – Invader, which is no longer produced by the Chinese in its original form. The company has already released several devices from this series and the last of them is the Teslacigs Invader 4X Vape Kit – still the same version, but already in a plastic case, light and slightly resembling its ancestor. It’s hard to say whether this starter kit is worthy of the proud name Invader,
Teslacigs Invader 4X Vape Kit is a starter kit consisting of a two-battery option with the ability to change the operating voltage, and an easy-to-use double-helix drip that will allow you to get enough taste and pile. The Invader 4X box mod somewhat resembles its predecessors, but it is made of plastic, which makes it easier and more practical. Dripka, which is equipped with a starter kit, does not differ by innovative technologies, but at the same time it is easy to maintain and use and allows you to get quite a decent taste and bulk. Teslacigs offers this starter kit in four colors – black, blue, red and white.
We should pay tribute to the company Teslacigs, which is always trying to adequately complete their devices, and especially the start kits. Therefore, in a fairly simple and unobtrusive white box, the vaper waits for:
Varivatt Invader 4X mod;
Dip atomizer Invader 4X RDA;
Two prewound spirals;
USB charging cable;
Certificate of originality.
You can honestly say that there is a box so that you can assemble a device right after unpacking and begin to soar.
Varivatt Invader 4X mod
Immediately, you will have to upset those lovers of the good old Invader, made of aluminum alloy and resembling a tin box of an army type, that the Invader 4X mod resembles its name only. Why did Teslacigs decide to move away from a bit of a brutal and crude concept of options? This is a million question. But the fact remains that the Invader 4X mod is made of plastic. There is, of course, a significant plus in this – it weighs only 75.5 grams without batteries, which in its own way can not but rejoice, since it is no longer a problem to carry it in your pocket. In this case, it is worth paying tribute to the manufacturer regarding ergonomics – the device turned out to be compact and convenient to use. The fitting diameter of the device is 25 mm, so there will be no problems with the selection and installation of the rip instead of the complete one.
Invader 4X mod is a fairly traditional varivolt, which is controlled by a potentiometer located at the bottom of one of the side edges. In this version, the vaper itself can also control the voltage applied to the coil, within 3-8 Volts. The minimum resistance with which the mod is capable of working is 0.08 ohms, which is quite enough for many vapers. At the same time, the device is equipped with all the protections necessary for safe and stable operation.
The device is designed for a maximum power of 280 watts, provided by two 18650 batteries, although for such an indicator of power, clearly two batteries will not be enough. The installation of batteries is done by removing one of the side panels, held with fairly strong magnets. If necessary, batteries can be charged with a current of 2A using the micro-USB connector located on the side opposite to the battery compartment.
Dip atomizer Invader 4X RDA
Drip atomizer Invader 4X RDA in its construction very much resembles Mad Dog 2 from Desire, and it cannot be said that this is bad, since the drip can be safely attributed to a stable middle class.
The base in dripke is two-column with holes for the installation of two spirals. Fastening spirals made from the top, which is very convenient and practical. Blowing the bottom-side, allowing you to get quite decent taste transfer and bulk. The bath is deep enough, containing 1.2 ml of liquid, which is a normal indicator for a drip of this class.
Conclusions and impressions
Despite the fact that the Teslacigs Invader 4X Vape Kit is “not the same”, the starter kit will definitely interest many, because even with a plastic case it has all the same functionality. The Teslacigs Invader 4X Vape Kit is a simple and seemingly uncomplicated set, but it will allow the vaper, who prefers to use the varivolt instead of the varivatt, to get rather high performance indicators.
Exvape Expromizer V4 MTL RTACase material: stainless steel Atomizer type: RTA Capacity: 2 ml Diameter: 23 / 23.5mm maximum Height: 56mm with Drip type / 43mm without Drip type Connector: 510, pin gold-plated Weight:74.5g Color: see photo below Options – Expromizer V4 MTL RTA – Screwdriver – Spare Orings
– spare screws – spare glass – extra tip Drip type – User Guide I have to say – this is my first acquaintance with the brand firsthand, therefore, no comparisons with previous versions of me do not wait – is not competent. Well, almost no) The exterior of our hero in a European way is prim and neat, I quite liked him. Moreover, I was pleased with the fact that the 4th version has become much more pleasant to the eye and hand than the “square-angled” predecessors. The edges are rounded, there are almost no sharp and protruding parts – in a word the impromiser “looked like a man”, but did not lose the brutal and “truculent” bow.
About the dimensions should be said separately – the device is not small, comparable to about the second siren. And fans of the brand should just jump for joy – after all, it is less than the third version, even in the 2-ml performance almost by a centimeter, not to mention the 4-ml. Since all the parts are metal, and, moreover, massive, the weight is also decent. Drip type is made of metal, a plastic tip is threaded. Landing 510th, and there is a small take-off on the cover – its diameter is 13mm. The inner hole is about 2mm with a penny. In work, he is quite good, but he will water you with condensate, and regularly and not slowly – this is definitely a minus. In order to somehow smooth the impression, the developers put a replaceable pill of a dolrin in a dark color in a box.
The lid on the threaded connection, will have to twist a little, and get into the thread comfortably. But! The risks are very smooth. And the thickness of the cover is small – almost nothing to grab. Therefore, it is not necessary to twist it very tightly, later we will return to this point. Holes for refueling are sufficient. They are recessed below the sides, I do not squeeze out outside – all good.
Below we stumble on the tightening adjustment ring with a stopper. The risks are also very smooth, and the origings are very dense. Therefore, the adjustment of the blower is a painstaking and labor-intensive matter, and we will return to this point later too. In total there are six air intake holes, but they are very small. Therefore, at the output, even on all open holes, we obtain a tight pull. It is comparable, for example, with the second largest single hole in the second siren. While one open slightly tighter penultimate hole on the siren. In short, the tightness of the tight – it is for those who like to glue the cheeks.
The capacity for such a bandura is very small, and in my case it will not be possible to increase it – the complete glass is exactly the same. You can not say about the other version – there it will increase it twice. By the way, a plastic “glass” in the tone of a pimple of a drip type is preset, but the spare one is glass. The dome, as you rightly guessed, is double – it’s still a non-spill construct, after all. The diameter of the mine is about 3mm, internal processing under the cone. The diameter of the evaporation chamber is approximately 13mm. In the lower part, eight nozzles of the air channel are visible – then the air travels through the channels inside the deck. And on the basis of the sidewall, decent saw cuts for supplying liquid to the cotton are visible, and this process is adjustable. It is worth staying in more detail.
Adjusting the feed is of course cool – you can shut it off while refueling or not using an atom, but this is not the case. And all because it is very free, no matter how I tighten the pin, the tank turns very easily. Moreover, this procedure can be done only with an atom twisted on a mod. As you may guess, in connection with this fact, the procedure for adjusting the tightening, unscrewing the tank cap, and unscrewing the tank itself from the mod is very difficult. Otherwise, it should be held behind glass or base, but even this will not help you in the last manipulation, therefore you will have to be content with a strong jerk. Thanks at least for the fact that the same constructive will not allow you to tighten the tank strongly on the mod. Deca looks very simple and simple.
In total there are two racks (5.5mm distance between them) for correct fixation of only one spiral, wound in any direction. Screws are figured, spare ones are similar, there are boards on both sides of them and they are not high – this is good. On the outside of the sides of the saw cut, for bending the legs of the spiral during fixation. It seems that everything is clear, but there is a nuance – racks less than one-millimeter rise above the airflow. Therefore, to search for TX, you will have to lift a spiral very high, making its legs in the manner of a gable roof. Well, oh well – this is not very critical, although admitting for MTL is rather strange.
As a blowing nozzle at the bottom, its diameter is a millimeter with a small one. There is plenty of space for wadding, you can not even comb it after installation. Limiters are available, they also made three holes on each side – the latter is smaller. It is through them that the feed is adjusted. For a 50/50 liquid, even the smallest hole is enough, but I was more comfortable with two. There can be no talk of zhizhelovodaniya – everything is clear, and I did not overflow.
Well, below will be a “sheet” about the taste transfer. There is a taste here, it is good, but I must admit, he was not impressed. Perhaps, in advance, I tuned in that such an “eminent” brand simply must be, if not a reference, then at least cool. But alas, it is not. I would call it an average – here I want to note that I, too, refer to the Beers as an average for this indicator. But our hero still overtakes them noticeably. And yet, whatever one may say, he does not reach, as for me, even to the level of the same frescia, not to mention the siren No. 2. As for the TX, here, too, is not quite “his day” – and I would also call TX the middle one, and with a downward slant. This is despite the fact that I decently pulled up a spiral over the blower. In defense, I want to add that the taste of the liquids I knew seemed much “softer”, probably the merit of quite a moderate level of TX.
Pin is gold plated and it is customizable, if you can call it that. Perhaps this is useful to someone. Impressions of use To begin with, I was pleased with the quality of performance – Oriing threads and the fact that the tank is fully collapsible. However, for such a sum, I was probably wasting my time in hoping to get a chic copy of the transfer of taste and the level of TX. Maybe this ultimately hindered me in my assessment, although I still don’t think so. I don’t exactly linger on this copy on the table, because it’s very massive, well, God bless it, it didn’t catch me exactly. And the saddest thing – it went around the less well-known, and most importantly, the competitors who were twice cheaper. Probably the most expressive of its advantages I would call the impenetrability and the ability to adjust the slush feed, even if it was made a little crooked.
Perhaps, I treated him too critically, but as it is, there are as many minuses as there are pluses. Therefore, it seems to me that the lot of this novelty is only “true fans” of the brand. Well, perhaps, even those who appreciate the quality of performance and a decent amount of parts into which the atomizer is disassembled)