Augvape V200 mod – they made a box mod like a Honda B18cR cylinder block

Augvape has become very popular thanks to a friend’s drip . About this dripka reviews took off probably all the bloggers in the field of vaping. 
And the engineers presented the electronic box-mod Augvape V200. A fashion tweak is a metal case that is styled to fit the cylinder head of a Honda car engine. Surely the emphasis in the creation of this device was placed on fans of this brand of car.

Equipment

Comes mod in a plastic box that looks very presentable. Inside the box-mod, a branded USB cable that looks very nice, albeit a bit short, about 0.5 m, USER-manual (color, English language), card for participating in an inste party in Augvape.

Information for information

Augvape V200 mod is made of zinc alloy and is available in three colors: white, black (matte), red, has three modes of operation: varivat, mech mode – Bypass and another varivat mode – V Mode, raises the mode from 0.05 Ohm It works on two 18650 batteries and is capable of charging them with a current of 1.2 A.

Dimensions:
Height: 90 mm 
Width: 45 mm 
Thickness: 29 mm 
Weight without batteries / with them: 165 g / 258.2 g

boxmodTechnical parameters:
Operating modes: varvatt / bypass / V Mode, 
Operating resistance: from 0.05 to 3 Ohms, 
Output power: from 5 to 200 W, 
Output voltage: from 0 to 8.4 V, 
Input voltage: from 6 to 8.4 V, 
Battery charging current: 1.2 A

Focus On www.urvapin.com For More Best Vape mods.

cvett

Overview

Located on top of the steel connector. The positive pin is gilded and has a tight turn, which will have a good effect on contacts with the atomizer or drip. The half-millimeter connector platform rises above the main body part and thus the paint on the body will not scratch and peel off. You can wind the atomizer up to 30 mm due to the central location of the connector and a large area of ​​landing.

devaise
The body is metal, painted with matte paint. Fingerprints remain in the black version. On the red and white this was not observed. 
Parts of the case are connected with screws. The main part of the mod has a monochrome display, the size of 0.96 inches.

disple
Fire button stylized display, slightly toned. The contact area of ​​fire is approximately 12 mm by 12 mm. Under the button there is an LED that starts to burn only at the moment of pressing and during the day it is not visible at all, only in the dark of the day. 
Next to the “Start” button there is a wheel, which acts as the “minus” and “plus” buttons. 
There is also a port for connecting a USB cable.

vruke
At the bottom there is a battery compartment lid that walks a little on the hinges, but closes adequately, did not open itself during the tests. 
The lid has a battery label and polarity. Also implemented charge balance system.

Mode Control and Modes

The mode turns on after the fire button is pressed 5 times. The combination of the fire and minus buttons locks the wheel, while the fire continues to work. 
On the display all the necessary information: voltage, winding resistance, current, battery capacity.

srda
By and large, in the boxing mode there are essentially 2 main modes: varivatt and Bypass. V Mode is also a variation and there is not much difference with the usual variation. 
The mod does an excellent job with resistance of 0.05 ohms, so there should not be any problems in burning the spiral. 
The board works very quickly after clicking on the fire. 
The modic is charging for a long time, since the charging current is only 1.2 A. At the same time, the long process of charging the batteries is beneficial for their lifespan upwards.

Overall impression

The device turned out to be interesting, the board works adequately. There are no thermal monitoring modes and therefore some such vap will not enter. In general, there are no complaints about the operation of the device. The only point is to the size of the mod. Thickness and width – everything is fine here and it’s nice to hold it in your hand. However, the V200 is tall. With atoms such as Griffin AIO or the popular TFV12 and TFV12 Prince, the bond will be very long. And so all is well.

Now It’s Available :

Augvape V200 Bypass Box Mod

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

Joyetech Exceed D19 Starter Kit Review

Joyetech Exceed D19 First Impression

So, where can I even start with this starter kit? I was super excited when Joyetech Exceed D19   turned up and got all giddy when I first opened the box! What a beauty this Exceed kit is! It’s really stylish and just so happened to match my favourite trainers so it was winning already with me! I have always used these ‘pen style’ devices so I was right in my comfort zone with this kit and thought I knew exactly what to expect…Or so I thought!

Joyetech Exceed D19 First Impression

Joyetech Exceed D19 Specs and Features

There were two coils supplied with it. One was silver and the other Gold (Always believe in your soul! Sorry I couldn’t resist!). I like my vaping to be like a cigarette. Therefore, I opt for the 1.2ohm as this was the one meant for this kind of experience.

After ‘priming’ the coil and making sure everything was ready, I took my first vape. Oh, wow! What in the heck was that? The flavour came through pretty much instantly and it was so intense, like I was actually eating my mango & raspberry ice cream liquid but in vape form! Unbelievable how it highlighted just how much I was missing out on from other daily vaping devices. I think it only took me about an hour to completely drain my tank and I was already eagerly filling it back up to carry on! Definitely the best flavour I have had so far in an e-cig.

The airflow has two different settings as well which I was not expecting. There is a large hole which lets you take in more air. And there are three much smaller holes which I used for that more traditional draw simulating a cigarette. It’s a great extra that I thought adding something new to cater for those people who like a different vaping style, kudos Joyetech!

You fill the device from the top which is a new feature to me. It really made it easy to top up when I was out and about without having to actually take the tank off and faff about with all those separate pieces that somehow end up all over the place!

I also loved this little light ring that seemed to surround the tank. It made the Exceed kit look really cool and absolutely appealed to me. The battery worked great too and seemed to be consistent throughout the full charge! You can change the way it outputs power as well so it makes the vape more intense if it’s on ‘unregulated’ mode (which has a nice Amber light). This is helpful for the morning time when I get that ultimate cigarette craving!

Joyetech Exceed D19 Final Thoughts

I mentioned it earlier. However, I just wanted to reiterate just how nice this device looks and feels. The size is just right and it is not bulky at all, perfect for pockets! I would recommend this to anyone who wants something that delivers unbelievable flavour. Truly you would not be disappointed. It is compact, stylish and just plain awesome! I will be using the Exceed kit for a long time to come. It is my favourite e-cig without a doubt, and without trying to sound too cheesy, it absolutely does EXCEED all expectations!

Now It’s Available :

Joyetech Exceed D19 Starter Kit

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

Wotofo Freakshow v2 RDA (25mm) Review

The Wotofo Freakshow v2 RDA is a new addition to the Freakshow series. But how has it been?

Today we are looking at the 25mm version of the new Wotofo Freakshow v2 RDA. There is also a 22mm version available if you require a smaller diameter RDA.Freakshow-v2-Wicked3

Wotofo is a company based in China and have been operating since 2009. Since then they have released atomisers such as the Troll V2, Freakshow and Sapor RDA’s and the original Serpent RTA as well as the Troll and Conqueror RTA’s.

The Freakshow v2 RDA is currently available in two finishes, black and stainless steel. Both look equally as nice as each other, so it’s completely up to you what colour you go for. In this review, we will be concentrating on the black version.

Focus On www.urvapin.com For Best Vape Tanks.

What’s In The Box

  • Wotofo Freakshow v2 RDA
  • Chuff Drip Tip
  • T-Tool
  • Spare Parts Pack
  • Pack of Wotofo Comp Wire Pre-built Coils
  • Pack of Organic CottonFreakshow-v2-Unboxed

Features

  • 25mm Diameter
  • Available in Stainless Steel and Black
  • Rhodium Plated Copper Contact
  • Dual Adjustable bottom air flow & air flow in chamber
  • German Made PEEK Insulator
  • 304 Stainless Steel

Build Quality & Design

We’ll start from the top and make our way down the device.

The Drip Tips:Freakshow-v2-Tips

At the top of the Freakshow v2, we have a stainless steel 510 drip tip that is black in. It is held into the 510 top cap with dual o-rings. It is wide, but not enough to cause any problems in the mouth.

The inside of the drip tip is conical which reduces the airflow slightly. With the 510 adapter, you can also attach your own 510 drip tip if you require.Freakshow-v2-510

You are able to replace the 510 drip tip assembly with an extremely wide bore drip tip. This is a much larger bore than the original 510 drip tip both internally and externally. It offers increased airflow and slightly better flavour. I am personally preferring this drip tip over the smaller 510 version. It looks and feels a lot better when using this RDA.Freakshow-v2-Chuff

The Inner Airflow Control Barrel:Freakshow-v2-Airflow-Inner2

Below that is the inner airflow control barrel. This is held into the outer airflow barrel with a single o-ring, quite snugly as well! It has fins at the top to dissipate heat from the RDA as well as aiding in removal of the top cap.

Below that are two groups of 3 and two groups of 7 air holes which correspond with the slots in the outer airflow barrel to give you plenty of airflow options. Possibly far too many options though!Freakshow-v2-Airflow-Inner1

The Outer Barrel:

The outer barrel has 3 slots on either side. the top set are for the side airflow and the bottom set are for the bottom “Kennedy-Style” airflow chimneys. You can cut off the Kennedy-Style airflow by rotating the barrel on the deck if you wish.Freakshow-v2-Airflow-Outer

In between the airflow slots, it has “Freakshow” engraved in an American Horror Story-style font. I personally think this looks great on the RDA, and doesn’t stick out too much.

The RDA Deck:

The RDA deck is a dual post “Velocity-Style” deck design. It has relatively large post holes and you can secure your coils with allen key grub screws.

I personally think that the positive post is too far in towards the centre of the RDA compared to the negative post. This makes aligning your coils over the bottom chimney a little bit harder as they are central to the deck.Freakshow-v2-Deck1

The juice well is quite deep, which allows a nice amount of e-liquid to collect, just in case you like to deliberately over-drip to save dripping too often.Freakshow-v2-Deck2

There are two chimneys located in the deck which offer bottom airflow to your coil. These are nicely sized, but they do tend to collect condensed e-liquid from time to time, so be sure to get a cotton bud in there every so often to soak it up.

At the base of the RDA deck are two o-rings which prevent leakage and secures the RDA base onto the outer airflow barrel. Underneath you have the usual Wotofo markings along with your 510 pin which protrudes a nice amount.

So with the RDA I have here today, I would be happy with using it on a hybrid mech if needs be. Please double check yours beforehand, as the protrusion may vary.Freakshow-v2-Deck3

How Does the Wotofo Freakshow v2 RDA Perform?

On this RDA, I have been using a pair of twisted spaced kanthal coils which are the ones included in the accessories bag. They have come out to 0.26Ω on multiple devices as well as the Coil Master 521 Mini Tab.Freakshow-v2-Coiled

Ease Of Build On The Wotofo Freakshow v2 RDA

The Freakshow v2 is extremely simple to build on. The dual post design along with separate holes and the large deck space allow easy coil placement.

Slotting in the coils is an absolute breeze, just poke the legs through, clamp them down and cut off the legs.

I find that positioning the coils over the central chimney was slightly awkward due to the posts not being the same distance away from the centre of the RDA.

Wicking the device is also simple and easy. Just poke the wick through the coils, cut off the excess and poke the wick down into the deep juice wells.Freakshow-v2-Wicked1

Juice them up, and you’re ready to go!Freakshow-v2-Wicked2Flavour & Cloud Production

With the build I am using in the Freakshow v2, I am getting very loose airflow, but it seems spot on for this atomiser. Obviously closing down the airflow will restrict the airflow further and increase the heat of the inhale.

Overall, the clouds and flavour are pretty damn good on the Freakshow v2. I would personally say that it is more concentrated on clouds rather than flavour due to the masses of airflow you get, but it does offer a respectable amount of flavour when you close down the airflow a few notches.

What I Like

The simple looks, interchangeable drip tips and deck design. All machined to a high standard with no sharp edges. Overall an extremely clean and tidy RDA!

The build deck is a great size. You can fit some HUGE coils in here, but you are obviously restricted by the size of the post holes.

What I Dislike

The positive post. It’s just that little bit too close to the centre of the RDA. A few more mm towards the outside and it would have been spot on. YES, this is petty, but I do love a bit of symmetry.

The Kennedy-Style airflow accumulates vapour residue over time. This makes screwing/unscrewing time rather messy if there is e-liquid flying out the airflow holes

Final Review Verdict

The Freakshow v2 RDA is a great RDA and offers many airflow options as well as the option to add your own 510 drip tip. The flavour is bloody good, but the clouds are even better.

Now It’s Available :Wotofo Freakshow V2 RDA Black

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA