SMOK G-Priv intro
Touchscreen devices are everywhere… may as well be on a mod too!
The Smok G-Priv is a 220W mod featuring a 2.4-inch touchscreen that has the most advanced OLED display to date of any mod. The G-Priv also features full temperature control modes including adjustable TCR for any wire type. he user may also adjust between 5 settings for the speed that you would like your vape to heat up in VW mode, or use a Pre-heat function for temperature control.
I received the G-Priv kit which pairs the mod with the Big Baby TFV8 Sub-ohm tank. Since the Big Baby has been reviewed already on Vaping360 this review will concentrate largely on the mod.
Let’s dive into the review and look at the details of the G-Priv.
SMOK G-PRIV specs and features
- One G-Priv 220 mod
- One TFV8 Big Baby
- One preinstalled V8-X4 coil head
- One replacement V8-T6 coil head
- One replacement glass tube
- Spare parts
- Instruction manual
The Smok G-Priv mod is a dual-battery 220-watt mod wired in series. The chassis is zinc alloy with a plastic firing bar similar to the H-Priv mod that was released previously. The battery door features a nice looking carbon fiber inlay, and the magnets that hold the door to the mod are quite strong. In fact, I have had a little trouble pulling the door off to change my batteries, but I definitely prefer that to my ipv5 that has a door that won’t stay on now matter how much I curse it.
The dimensions of the G-Priv are 85 mm tall by 58.5 mm wide, with a depth of 28 mm. It is a relatively short mod, approximately the same height as the Wismec rx200. The 28 mm depth does include the two side panels, but 25 mm diameter atomizers fit perfectly. I had no issues with any of the atomizers I tried sticking up off the mod’s spring-loaded 510 connector.
The most exciting feature of the G-Priv is the advanced touch screen. Covered with shatterproof glass (and no, I didn’t try to see if I could break it, but my nickname could be Super Clutz), the 2.4-inch OLED screen is intuitive and features nice graphics. The screen lock button prevents your settings from being accidentally changed while the mod is in a pocket, purse, or shoved down between the bench seat in my pickup truck. To activate the screen lock, simply press the silver rectangular button located above the firing bar. Doing so will also cause the screen to go black, saving on battery power. Pressing the screen lock button again will activate the screen once again to allow the vaper to change settings or check the dual battery icons to estimate remaining battery life.
I found using the touch screen to very intuitive and glitch free. Clicking the firing bar five times in two seconds turns on the G-Priv. The mod will prompt you to choose from New Coil or Same Coil. From there the home screen shows four icons: TC Mode, VW Mode, Max Puff and Settings.
Once you have chosen VW mode you may adjust your wattage setting from 1W up to the full 220W. There is a bar to allow fast adjustment and also + and – signs for fine tuning. Users may also choose how slowly or quickly their atomizer heats up by clicking Effects. Five choices are offered: Min, Max, Soft, Norm, and Hard. Once you have made your selections click on Activate to begin vaping. You will also see a new screen that allows you to change your wattage, counts puffs and shows resistance and remaining battery life. You may allow that screen to remain visible or press the Screen Lock to lock-in your screen and black it out.
Features of the G-Priv
The G-priv has a huge range of power adjustment, ranging from 1 to 220 W. The minimum atomizer resistance allowed is 0.06 ohms.
Not surprisingly, the G-Priv has temperature control (TC). Users may adjust between 200 and 600 degrees fahrenheit. What is a bit surprising are that all the bells and whistles are included, and that isn’t something seen often for a mod in this price range. The G-Priv has modes for ni200, titanium and stainless steel. However, it also has Temperature Coefficient of Resistance (TCR) adjustments. I was very happy about having adjustable TCR since I use stainless steel wire. Since stainless steel is available in several grades, mods that do not allow users to adjust TCR often will not work well for me in TC mode because they may not be programmed for the grade of stainless steel I am using.
Users may choose how quickly or slowly their atomizer heats up with the following settings: Min, Max, Soft, Normal, Hard.
The Big Baby Sub-ohm tank really is a beast!
Really good looking mod (and tank)
Carbon Fiber inlay on the strong magnet battery door
Adjustable TCR for stainless steel coil users
Five drawing effects to dial in your vape
Intuitive touch screen with shatterproof glass
Large range of power adjustments for most vapers
Firing bar on my unit has a lot of slop
Touch screen is a fingerprint magnet
Included Big Baby atomizer caters to high power cloud lovers only
The G-Priv kit is aimed at vapers who like to “put the pedal to the metal” and pump out massive performance. And this combo sure will! I recommend the kit to cloud lovers looking for a nicely paired mod and tank, especially if you enjoy the convenience of using factory coil heads.
For those looking at the G-Priv mod only, it will suit a large variety of vapers with its range of power settings. You get a lot of nice features for the money, all wrapped up in a smart-looking package.
Now It’s Available :
Hot Sale Recommendation: